![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948160.webp)
151
11
SCANS
About the scan type switching procedure
You can switch the scan type between various scans while scanning, as shown below.
M E M
∂
F
SPAN
S E T
S E L
SCAN
SEL−MEMO SCAN
Select Memory scan
M E M
∂
F
SPAN
S E T
S E L
SCAN
SEL−MEMO SCAN
Select Memory scan
D
Select Memory scan
Select Memory scan searches for signals through
Memory channels specified as “Sel” (Select).
NOTE:
For a Select Memory scan to start, two or
more Memory channels must be designated as Se-
lect Memory channels. (See above)
q
Follow steps
q
through
t
as described in ‘
D
Memory scan’ on the previous page, to start Mem-
ory scan.
• While scanning, holding down [MEM](F-1) for 1 second
turns ON the Mode Select scan.
w
Push [SEL](F-3) to turn ON the Select Memory
scan.
• The scan changes to a Select Memory scan.
• “SEL–MEMO SCAN” blinks while scanning.
• Pushing [SEL](F-3) toggles between Memory scan (or
Mode Select scan)* and Select Memory scan.
*Only when the Mode Select scan is turned ON.
• If
“Up/Down” is selected as the “MAIN DIAL (SCAN)”
option in the Scan Set mode, rotating [MAIN DIAL]
changes the scanning direction. (p. 147)
e
Push [MEM](F-1) to cancel the scan.
All Memory channels can be set as Select Memory
channels, except for the Scan Edge and Call channels.
➥
When the “SCAN” screen is displayed, push [SEL]
(F-3), or when the “MEM” screen (Memory Menu)
is displayed, push [SEL](F-5) to set or cancel the
displayed Memory channel as a Select Memory
channel.
• “SEL” appears when the channel is set as a Select
Memory channel.
• An error beep sounds when the displayed Memory
channel is a blank channel.
• Holding down
[SEL](F-3)
or
[SEL](F-5)
for 1 second
displays “SEL ALL Clear?.” Hold down [YES](F-4) to
clear all Select Memory channel settings.
M E M
∂
F
SPAN
S E T
S E L
SCAN
MEMO SCAN
M E M
∂
F
SPAN
S E T
S E L
SCAN
SEL−MEMO SCAN
E D T
(
)
S E L
MEM
14.19500 USB
M E M
∂
F
SPAN
S E T
S E L
SCAN
∂
F
:
±
1 0 k
Appears
“SCAN” screen
“MEM” screen (Memory Menu)
While Select Memory scanning
■
Memory scan (Memory mode) (Continued)
D
Setting/Cancelling Select Memory channels
Push
[SEL](F-3)
Push
M E M
∂
F
SPAN
S E T
S E L
SCAN
MEMO SCAN
M E M
∂
F
SPAN
S E T
S E L
SCAN
MODE−SEL SCAN
Hold down
[MEM](F-1)
Memory scan
Mode Select scan
Push
[SEL](F-3)