![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948110.webp)
101
8
DV MODE OPERATION
■
Calling CQ
First, program a MY call sign in step
q
.
Next program the repeater list (p. 89). After that, follow
this guide to access a D-STAR repeater.
The optional CS-9100* cloning software is helpful for
programming call signs and programming the repeater
list.
*Cloning cable is required.
q
Set your own call sign (MY).
(p. 85)
w
Hold down [DV
•
DR] for 1 second to select the DR
mode.
•
The last used access repeater is displayed.
- If the displayed frequency band on the SUB Band is
the same as that of the last used access repeater, se-
lecting the DR mode on the MAIN Band will automati-
cally move the frequency band on the SUB Band to
the Main Band display, and turn OFF the SUB Band
display.
e
Rotate [MAIN DIAL] to select the desired access
repeater.
• Only the repeaters
, whose “R1USE” setting is set to
YES, or Access repeater scan targets
are displayed.
(pp. 90, 100)
• First selecting the repeater call sign group makes it
more convenient, if you have programmed repeaters
into Groups. (p. 93)
• Access repeater scan can be used for the selection.
(p. 100)
r
Push [UR](F-4) to enter the UR call sign selection
mode.
Steps
t
through
u
differ, depending on the com-
munication form.
CS
C D
R > C S
U R
DSET
D1
GRP3
R
1
: N A R A 4 3
CS
C D
R > C S
U R
DSET
D1
UR
U
R
: C Q C Q C Q
[MAIN DIAL]
[D
V•DR]
[UR]
Access repeater selection screen
UR call sign selection screen
Repeater group selection screen
Appears
≈
GRP3
CS
C D
R > C S
U R
DSET
D1
R
1
: N A R A 4 3
Appear
[TRANSMIT]
[
TS•GRP]
[MAIN DIAL]
MAIN Band TX/RX indicator
Making a CQ call through your local area (access)
repeater (Local Area CQ)
My call sign
:
JA3YUA
CQ
Area
Zone
Repeater
q
:
NARA43 (JP3YHL)
q
w
e
r
t
Rotate [MAIN DIAL] to select “CQCQCQ.”
• First selecting a call sign group as
“CQCQCQ” by push-
ing [TS•GRP] makes it more convenient.
y
Push [PTT] on the microphone to transmit. (or
[TRANSMIT] on the transceiver)
• The MAIN Band TX/RX indicator lights red.
u
Release [PTT] to receive. (or push [TRANSMIT]
again)