![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948194.webp)
185
18
CONTROL COMMAND
D
Command table (continued)
Cmd.
Sub cmd.
Data
Description
15
01
00
Read squelch status (squelch close)
01
Read squelch status (squelch open)
02
0000 to
0255
Read S-meter level
(0000=S0, 0120=S9, 0240=S9+60 dB)
11
0000 to
0255
Read RF power meter
(0000=0%, 0141=50%, 0215=100%)
12
0000 to
0255
Read SWR meter
( 0000=SWR1.0, 0041=SWR1.5,
0081=SWR2.0, 0120=SWR3.0)
13
0000 to
0255
Read ALC meter
(0000=Min. to 0120=Max.)
14
0000 to
0255
Read COMP meter
(0000=0 dB, 0120=15 dB, 0240=30 dB)
16
02
00
Send/read Preamp OFF
01
Send/read Preamp ON (144/430/1200 MHz)
Send/read Preamp 1 ON (HF/50 MHz)
02
Send/read Preamp 2 ON (HF/50 MHz)
12
01
Send/read AGC FAST
02
Send/read AGC MID
03
Send/read AGC SLOW
22
00
Send/read Noise Blanker OFF
01
Send/read Noise Blanker ON
40
00
Send/read Noise Reduction OFF
01
Send/read Noise Reduction ON
41
00
Send/read Auto Notch function OFF
01
Send/read Auto Notch function ON
42
00
Send/read Repeater tone OFF
01
Send/read Repeater tone ON
43
00
Send/read Tone squelch OFF
01
Send/read Tone squelch ON
44
00
Send/read Speech compressor OFF
01
Send/read Speech compressor ON
45
00
Send/read Monitor function OFF
01
Send/read Monitor function ON
46
00
Send/read VOX function OFF
01
Send/read VOX function ON
47
00
Send/read BK-IN function OFF
01
Send/read Semi BK-IN function ON
02
Send/read Full BK-IN function ON
48
00
Send/read Manual notch function OFF
01
Send/read Manual notch function ON
4A
00
Send/read AFC function OFF
01
Send/read AFC function ON
4B
00
Send/read DTCS OFF
01
Send/read DTCS ON
4C
00
Send/read VSC function OFF
01
Send/read VSC function ON
4F
00
Send/read Twin Peak Filter OFF
01
Send/read Twin Peak Filter ON
50
00
Send/read Dial lock function OFF
01
Send/read Dial lock function ON
55
00
Send/read 1st IF filter 3 kHz
01
Send/read 1st IF filter 6 kHz
02
Send/read 1st IF filter 15 kHz
56
00
Send/read DSP filter type SHARP
01
Send/read DSP filter type SOFT
57
00
Send/read manual notch width WIDE
01
Send/read manual notch width MID
02
Send/read manual notch width NAR
58
00
Send/read SSB transmit bandwidth WIDE
01
Send/read SSB transmit bandwidth MID
02
Send/read SSB transmit bandwidth NAR
Cmd.
Sub cmd.
Data
Description
16
59
00
Send/read Sub band OFF
01
Send/read Sub band ON
5A
00
Send/read Satellite mode OFF
01
Send/read Satellite mode ON
5B
00
Send/read DSQL/CSQL OFF (DV mode
only)
01
Send/read DSQL ON (DV mode only)
02
Send/read CSQL ON (DV mode only)
17
see p. 191 Send CW messages
19
00
Read the transceiver ID
1A
00
see p. 195 Send/read memory contents
01
see p. 191 Send/read band stacking register con-
tents
02
see p. 191 Send/read memory keyer contents*
1
03
00 to 49 Send/read the selected filter width
( AM: 00=200 Hz to 49=10 kHz;
other than AM modes: 00=50 Hz to
40/31=3600 Hz/2700 Hz)
04
00 to 13 Send/read the selected AGC time constant
( 00=OFF, AM: 01=0.3 sec. to 13=8.0 sec.
SSB/CW/RTTY: 01=0.1 sec. to 13=6.0 sec.)
05
0001
0000 to
0255
Send/read LCD contrast level
(0000=0% (low) to 0255=100% (high))
0002
0000 to
0255
Send/read LCD backlight brightness level
(0000=0% (dark) to 0255=100% (bright))
0003
0000 to
0255
Send/read beep level
(0000=0% to 0255=100%)
0004
00
Send/read beep level limit OFF
01
Send/read beep level limit ON
0005
00
Send/read confirmation beep OFF
01
Send/read confirmation beep ON
0006
00
Send/read band edge beep OFF
01
Send/read band edge beep ON
(Beep sounds with a default band)
02
Send/read band edge beep with user set-
ting ON
03
Send/read band edge beep with user set-
ting/TX limit ON
0007
0050 to
0200
Send/read beep audio frequency for MAIN
Band
(0050=500 Hz to 0200=2000 Hz)
0008
0050 to
0200
Send/read beep audio frequency for SUB
Band
(0050=500 Hz to 0200=2000 Hz)
0009
00
Send/read Auto selection for [RF/SQL]
01
Send/read SQL selection for [RF/SQL]
02
Send/read RF+SQL selection for [RF/SQL]
0010
00
Send/read Meter Peak Hold function OFF
01
Send/read Meter Peak Hold function ON
0011
00
Send/read FM/DV Center Error function
OFF
01
Send/read FM/DV Center Error function
ON
0012
00
Send/read Time-Out Timer OFF
01
Send/read 3 min. Time-Out Timer
02
Send/read 5 min. Time-Out Timer
03
Send/read 10 min. Time-Out Timer
04
Send/read 20 min. Time-Out Timer
05
Send/read 30 min. Time-Out Timer
0013
00
Send/read PTT Lock function OFF
01
Send/read PTT Lock function ON
0014
00
Send/read Quick Split function OFF
01
Send/read Quick Split function ON
0015 see p. 192 Send/read Split offset frequency