![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948109.webp)
100
8
DV MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
• Access repeater scan
’
s target setting
You can select the desired repeaters as a scan target
,
for faster selection and scanning.
Non-selected repeaters are skipped during scanning.
•
When a repeater is specified as a non-scan target, its
“R1USE” setting is automatically set to NO. In this case,
the repeater cannot be selected as the access repeater.
(p. 90)
q
In the DR mode, push [MENU] one or more times to
display the “D2” screen.
w
Rotate [MAIN DIAL] to select the desired access
repeater.
• First selecting the repeater call sign group makes it
more convenient, if you have programmed repeaters
into Groups. See the description in page 93 for details
of the repeater call sign group selection.
e
Hold down [SEL](F-2) for 1 second to set the select
setting to ON.
• “SEL” appears.
r
Push [SEL](F-2) to set the select setting to OFF.
• “SEL” disappears.
t
Push [MENU] to return to the “D2” screen.
D
Access repeater scan
The Access repeater scan is useful to find a repeater.
For rapidly find, the Access repeater scan skips the
repeaters which are not specified as a scan target.
You can select the desired repeaters as a scan target.
See page 90 or ‘Access repeater scan’s target setting’
as described below.
q
Hold down [DV
•
DR] for 1 second to select the DR
mode.
• The DV mode is automatically selected.
•
The access repeater selection screen is displayed.
- Only the repeaters, specified as a scan target are dis-
played.
w
Push [MENU] one or more time to display the “D2”
screen.
e
Push [SCAN](F-1) to start the Access repeater
scan.
• The MHz and kHz decimal points, and “
” blink while
scanning.
• Hold down [SCAN](F-1) for 1 second to enter the Scan
set mode. Push [MENU] to exit the Scan set mode.
- If “Up/Down” is selected as the “MAIN DIAL (SCAN)”
option in the Scan Set mode, rotating [MAIN DIAL]
changes the scanning direction. (p. 147)
• The scan pauses when a signal is received.
r
Push [SCAN](F-1) to cancel the scan.
[D
V•DR]
[MENU]
[SCAN]
[MAIN DIAL]
[D
V•DR]
[MENU]
[SEL]
[TS•GRP]
GRP
SCAN
SEL
A F C
D S Q
TCON
D 2
R
1
:
GRP3
SCAN
SEL
A F C
D S Q
TCON
D 2
R
1
: H I R A N O 4 3
GRP1
SCAN
SEL
A F C
D S Q
TCON
D 2
R
1
: F U J I S W 4 3
GRP1
SEL
D2
F U J I S W 4 3
SEL
GRP1
SEL
D2
F U J I S W 4 3
When the select setting is OFF.
GRP1
SCAN
SEL
A F C
D S Q
TCON
D 2
R
1
: H A M A C H 4 3
Rotate [MAIN DIAL]
Hold down
Push
While Access repeater scanning