![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948159.webp)
150
11
SCANS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
D
Memory scan
A Memory scan searches for signals through Memory
channels 1 to 99.
Blank (unprogrammed) Memory channels are skipped.
NOTE:
For a Memory scan to start, two or more
Memory channels must be programmed. (p. 140)
q
Push [VFO/MEMO] to select the memory mode.
w
Push [MENU] to display the “M2” screen (Menu 2).
e
Push [SCAN](F-1) to display the “SCAN” screen.
r
Set [RF/SQL] open or closed.
• The scan performance differs, depending on the squelch
setting when the scan was started. See page 146 for
details.
• If the [RF/SQL] control function is set to “AUTO,” the
squelch is always open in the SSB, CW and RTTY
modes. (pp. 44, 162)
t
Push [MEM](F-1) to start the Memory scan.
• The MHz and kHz decimal points, and “MEMO SCAN”
blink while scanning.
• If
“Up/Down” is selected as the “MAIN DIAL (SCAN)”
option in the Scan Set mode, rotating [MAIN DIAL]
changes the scanning direction. (p. 147)
y
Push [MEM](F-1) to cancel the scan.
■
Memory scan (Memory mode)
[SCAN]/[MEM]
[VFO/MEMO]
[MENU]
[RF/SQL]
SCAN
M E M
S W R
TCON
V S C
M 2
M E M
∂
F
SPAN
S E T
S E L
SCAN
∂
F
:
±
1 0 k
M E M
∂
F
SPAN
S E T
S E L
SCAN
MEMO SCAN
While Memory scanning
D
Mode Select scan
Repeatedly scans all Memory channels with the same
operating mode as the displayed mode.
NOTE:
For a Mode Select scan to start, two or more
Memory channels must be programmed, and their
operating mode must be the same as the displayed
mode.
q
Follow steps
q
through
r
as described above.
w
Hold down [MEM](F-1) for 1 second to turn ON the
Mode Select scan.
• “MODE-S” appears.
e
Push the mode switch to select the desired operat-
ing mode to be scanned.
r
Push [MEM](F-1) to start the Mode Select scan.
• The MHz and kHz decimal points, and “MODE-SEL
SCAN” blink while scanning.
• If
“Up/Down” is selected as the “MAIN DIAL (SCAN)”
option in the Scan Set mode, rotating [MAIN DIAL]
changes the scanning direction. (p. 147)
• Memory scan and Mode Select scan can be switched
by holding down [MEM](F-1) for 1 second.
t
Push [MEM](F-1) to cancel the scan.
While Mode Select scanning
Push
Push
M E M
∂
F
SPAN
S E T
S E L
SCAN
MODE−SEL SCAN
[SCAN]/[MEM]
[VFO/MEMO]
[MENU]
[RF/SQL]
Mode switches