![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948090.webp)
81
6
FUNCTIONS FOR TRANSMIT
■
∂
TX function
The
∂
TX function shifts the transmit frequency up to
±9.99 kHz in 10 Hz steps* without changing the re-
ceive frequency.
* The [RIT/
∂
TX] control tunes in 1 Hz steps when the operating
frequency readout is set to the 1 Hz step readout. However,
the 1 Hz digit is not displayed on the frequency shift readout.
q
Push [
∂
TX] to turn ON the
∂
TX function.
• “
∂
TX” and the frequency shift appear when the function
is ON.
w
Rotate [RIT/
∂
TX].
e
To reset the
∂
TX frequency, hold down [CLEAR] for
1 second.
• Push [CLEAR] momentarily to reset the
∂
TX frequency
when the Quick RIT Clear function is ON. (p. 164)
r
To cancel the
∂
TX function, push [
∂
TX] again.
• “
∂
TX” and the frequency shift disappear.
When the RIT and
∂
TX functions are ON at the same
time, [RIT/
∂
TX] shifts both the transmit and receive
frequencies from the displayed frequency at the same
time.
✔
For your convenience— Calculate function
The frequency shift of the
∂
TX function can be added
to or subtracted from the displayed frequency.
➥
While displaying the
∂
TX frequency shift, hold
down [
∂
TX] for 1 second.
D
∂
TX Monitor function
When the
∂
TX function is ON, holding down [XFC] al-
lows you to listen to the transmit frequency (including
the
∂
TX frequency offset).
■
Monitor function
The Monitor function allows you to monitor your trans-
mit IF signals in any mode. Use this to check voice
characteristics while adjusting transmit parameters.
(p. 169)
The CW sidetone functions regardless of the [MONI-
TOR] setting.
q
Push [MONITOR] to turn ON the Monitor function.
• “MONI” appears when the Monitor function is ON.
w
Hold down [MONITOR] for 1 second to display the
“MONI” screen (Monitor).
e
Rotate [MAIN DIAL] to adjust the monitor level.
• F
or the clearest audio output, adjust while holding
down [PTT] and speaking into the microphone.
• Hold down [F-3] for 1 second to reset to the default set
-
ting, if desired.
r
Push [MENU] to return to the previous menu.
[
∂
TX] [RIT/
∂
TX]
[CLEAR]
D U P
A G C
C O M P
T B W
S C P
M 1
Appears
[XFC]
[MONITOR]
[MAIN DIAL]
[MENU]
[F-3]
Shows the monitor level
5 0 %
MONI
MONITOR Level
Appears