![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948031.webp)
2
22
INSTALLATION AND CONNECTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
Selecting a location
Select a location for the transceiver that allows ade-
quate air circulation, free from extreme heat, cold, or
vibrations, and away from TV sets, TV antenna ele-
ments, radios and other electromagnetic sources.
The base of the transceiver has adjustable feet for
desktop use. Set the feet to one of two angles, to meet
your operating preference.
■
Grounding
To prevent electrical shock, television interference
(TVI), broadcast interference (BCI) and other prob-
lems, ground the transceiver using the GROUND ter-
minal on the rear panel.
For best results, connect a heaviest gauge wire or
strap to a long ground rod. Make the distance between
the [GND] terminal and ground as short as possible.
R
WARNING! NEVER
connect the [GND] ter-
minal to a gas or electric pipe, since the connection
could cause an explosion or electric shock.
[GND]
■
Electronic keyer and microphone connections
(dot)
(com)
(dash)
MICROPHONES (p. 30)
HM-36
SM-50
(Option
)
ELEC-KEY
A straight key can also be
connected. However, “Straight
key” must be selected in the
“Keyer Type” item of the Keyer
Set mode. (p. 55)
SM-30
(Option
)