![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948163.webp)
154
12
SATELLITE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
Setting the satellite VFO
q
Push [SATELLITE] to enter the satellite mode.
•
“
” and either “
” or “
” appear.
w
Push [VFO/MEMO] to toggle between the satellite
VFO and Memory mode.
• VFO or Memory mode data is displayed on the SUB
band while in the satellite mode.
e
Push [MAIN](1.8 1) to enable downlink frequency
tuning.
• The uplink frequency disappears.
r
Select the downlink frequency and the operating
mode.
• Push [MAIN](1.8 1) again after tuning.
t
Push [SUB](3.5 2) to enable uplink frequency tun-
ing.
• The downlink frequency disappears.
• Push [SUB](3.5 2) again after tuning.
NOTE:
To select the operating mode for uplink, push
[SUB] to enable the SUB band setting mode.
■
Tracking selection
q
Push [SATELLITE] to enter the satellite mode.
•
“
” and either “
” or “
” appears.
w
Push [NOR/REV](7 3) to toggle between normal
and reverse tracking.
D
Normal tracking
Both downlink and uplink frequencies simultaneously
increase or decrease in the same steps when you ro-
tate the [MAIN DIAL].
D
Reverse tracking
The downlink frequency follows the tuning dial rota-
tion, however, the uplink frequency changes in the
reverse direction to the [MAIN DIAL] rotation, in the
same steps.
[SATELLITE]
[SUB]
[VFO/MEMO]
[MAIN]
(1.8 1)
[SUB]
(3.5 2)
[MAIN DIAL] [M-CH]
Mode switch
A G C
D U P
C O M P
T B W
S C P
M 1
A G C
D U P
C O M P
T B W
S C P
M 1
MAIN Band
Downlink (Receive) frequency
SUB Band
Uplink (Transmit) frequency
[SATELLITE]
[NOR/REV]
(7 3)
[MAIN DIAL]
A G C
D U P
C O M P
T B W
S C P
M 1
Varies simultaneously
Satellite and
tracking icon
In the DR mode, pushing [SATELLITE] cancels it, and
then switches the transceiver to the satellite mode.
If you want to operate in the DR mode after exiting
the satellite mode, you must hold down [DV•DR] for
1 second.