![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948114.webp)
105
8
DV MODE OPERATION
■
Calling a specific station (Continued)
D
Confirming the setting
q
In the DR mode, push [MENU] one or more times to
display the “D1” screen.
w
Push [CS](F-1) to display the “CS” screen (Call
Sign).
e
Push [
Z
](F-1) one or more times to sequentially
display the “UR,” “R1,” “R2” or “MY” to confirm the
current call sign setting.
NOTE:
In the DR mode, you can change only the
“MY” call sign in the
“CS” screen (Call Sign).
[CS]/[
Z
]
[MENU]
C S U
R
J G 3 Y M K
J A 3 Y U A
M
Y
R
1
J P 3 Y H L
R
2
J P 3 Y H J
Ú
MY call sign
:
JA3YUA
Station call sign
:
JG3YMK
Repeater
q
:
NARA43 (JP3YHL)
Repeater
r
:
IKOMA43 (JP3YHJ)
GRP3
D1
R
1
: N A R A 4 3
CS
C D
R > C S
U R
DSET
D
Settings for
“UR”
and
“
R2,
”
depending on the communication form
Destination: CQ
Destination: An individual station
<Communication form: Local area call>
CQ
• UR setting : CQCQCQ
• R2 setting : N/A
<Communication form: Local area call>
• UR setting : An individual station
• R2 setting : NOT USE
✱
<Communication form: Zone call>
CQ
• UR setting : Destination repeater to send CQ in
the same zone
• R2 setting : N/A
<Communication form: Zone call>
• UR setting : An individual station
• R2 setting : Destination repeater in the same
zone
<Communication form: Gateway call>
CQ
• UR setting : Destination repeater to send CQ
• R2 setting : N/A
<Communication form: Gateway call>
• UR setting : An individual station
• R2 setting : GW
NOTE:
R1 setting is set to your access repeater’s call sign.