![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948094.webp)
7
85
DV MODE PROGRAMMING
The optional UT-121 is required for DV mode opera-
tion.
■
Call sign programming
Four types of call signs are used; “MY” (your own call
sign) “UR” (destination call sign, whether it is an indi-
vidual or a repeater.) “R1” (your access/area repeater
call sign) and “R2” (a destination or gateway repeater
call sign). Each call sign can be programmed with up
to 8 characters.
In addition, you can store up to 6 “MY” call signs, and
up to 99 “UR” call signs in the call sign memory. Up to
500 repeater call signs can be stored in the repeater
list.
D
“MY” (Your own call sign) programming
Your own call sign must be programmed for both digi
-
tal voice and low-speed data communications (includ-
ing GPS transmission).
q
Push [DV
•
DR] to select the DV mode.
w
Push [MENU] one or more times to display the “M3”
screen (Menu 3).
• In the DR mode, p
ush [MENU] once or twice to select
the “D1” screen.
e
Push [CS](F-1) to display the “CS” screen (Call
Sign).
r
Push [
Z
](F-1) one or more times to display the
“MY”
screen (
MY call sign setting
).
t
Rotate [MAIN DIAL] to select MY1, 2, 3, 4, 5, or 6
call sign memory.
y
Push [EDT](F-3) to enter the call sign programming
mode.
• A cursor appears and blinks.
u
Rotate [MAIN DIAL] to select the first character to
input.
When inputting numbers, push the appropriate key-
pad key.
• Push [DEL](F-4) to delete the selected character or
number.
• Push [SPC](F-5) to input a space.
i
Push [
Ω
](F-2) to move the cursor backwards, or
push [
≈
](F-3) to move the cursor forwards.
o
Repeat steps
u
and
i
to enter your own call sign.
• A call sign of up to 8 digits can be set.
• To program a note (up to 4 characters, for operating
radio type, area, etc.), go to step
!0
, otherwise go to
step
!2
.
!0
Push [
≈
](F-3) to move the cursor right side of “/”.
!1
Repeat steps
u
and
i
to program the desired 4
character note.
!2
Push [MENU] to store the programmed call sign
and note.
!3
Push [MENU] again to return to the “CS” screen.
[CS]/[
√
] [EDT]
[MENU]
[DV
・
DR]
[MAIN DIAL]
CS
C D
R > C S
U R
DSET
M3
C S U
R
CQCQCQ
M
Y
R
1
R
2
NOT USE
Ú
MY
Ú
≈
/
MY1
C L R
E D T
N A M E
MY
/
MY1
Ω
≈
D E L
S P C
MY
/
MY1
Ω
≈
D E L
S P C
Cursor
[
Ω
] [
≈
]
[DEL][SPC]
[MAIN DIAL]
• Programing a call sign
Input a space
Delete a character
Move cursor forwards
Move cursor backwards
Number input