![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948149.webp)
140
10
MEMORY OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Memory channels can be programmed in either the
VFO mode or the Memory mode.
D
Programming in the VFO mode
q
Push [VFO/MEMO] to select the VFO mode.
w
Set the desired settings into both VFO A and VFO
B.
➥
Select the band using [BAND](MAIN/SUB).
➥
Set the frequency with [MAIN DIAL] or the key-
pad. (p. 37)
➥
Set the operating mode with the mode switch.
(p. 43)
➥
Set other data (e.g. frequency offset, duplex di-
rection, tone squelch, split frequency operation,
etc.), if desired. (p. 138)
e
Rotate [M-CH] to select the Memory channel num-
ber to be programmed.
• “
” appears if the selected Memory channel is a
blank channel.
r
Hold down [MW] for 1 second to program the con-
tents into the Memory channel.
• Three beeps sound when the
memory programming is
complete.
D
Programming in the Memory mode
q
Push [VFO/MEMO] to select the Memory mode.
w
Rotate [M-CH] to select the Memory channel to be
programmed.
• The contents of the Memory channel appear in the dis
-
play.
• “
” appears if the selected Memory channel is a
blank channel.
e
Set the desired settings into the Memory channel.
➥
Set the frequency with [MAIN DIAL] or the key-
pad. (p. 37)
• When a blank channel is selected, you must set the
desired frequency using the keypad.
➥
Set the operating mode with the mode switch.
➥
Set other data (e.g. frequency offset, duplex di-
rection, tone squelch, etc.), if desired.
r
Hold down [MW] for 1 second to program the con-
tents into the Memory channel.
• Three beeps sound when the memory programming is
complete.
NOTE:
If you perform the above operations in a pre-
programmed channel, the previous channel data will
be overwritten.
■
Memory channel programming
[VFO/MEMO] [MW]
[M-CH]
A G C
D U P
C O M P
T B W
S C P
M 1
A G C
D U P
C O M P
T B W
S C P
M 1
[EXAMPLE]:
Programming 7.088 MHz/LSB into the Mem-
ory channel 12 while in the VFO mode.
[EXAMPLE]:
Programming 21.280 MHz/USB into Memory
channel 18 while in the Memory mode.
• During setting the contents
[MAIN DIAL]
Keypad
[BAND](MAIN/SUB)
Mode selection