IC Realtime Max 16, User Manual

Page: 80 / 140

©2009 IC Realtime, Inc. 80
Figure 5-41
5.5.8.6.3 Motion Detection (including video loss and camera masking)
The Motion detection principle is the same as alarm. You can set this from the
motion detection menu (Main menu->Setting->Detect). See Figure 5-42.
In the detect menu, you can set the activation channel. You can also enable video
matrix function, and then set video matrix output channel as well. Once the activation
occurs, the system continues the scheduled matrix tour after the motion detection
tour completes. If there is no scheduled tour available, the matrix will stop at the last
activation channel after the alarm ends.
Figure 5-42
5.5.8.6.4 Touring Order of Operations
When the system is in a scheduled tour status and an alarm triggers, the system will
first check if the video matrix function has been enabled or not, and also if there is an
Select alarm input channel
Highlight here
Highlight here
Corresponding to video out put in
Figure
5-40
.