IC Realtime Max 16, User Manual

Page: 21 / 140

©2009 IC Realtime, Inc. 21
3. Dismantle the upper HDD bracket. 4. Install the HDD. Note the HDD is placed
upside down. make sure bracket is in
correct position.
If the HDD amount is less than four, you do not need to install the HDD bracket.
5.
Screw the two bracket parts together. 6. Put HDD bracket back and then fix firmly .
7. Loosen the power cable. 8. Connect to the SATA ports and then connect
power cord to the HDDs.
9. Place the upper cover back and screw firmly .
After HDD installation, check connection of data ribbon and power cord.
3.3
3.3 3.3
3.3 CD
CD CD
CD/DVD
/DVD /DVD
/DVD Burner
Burner Burner
Burner Installation
Installation Installation
Installation
For built-in burner, you remove the plastic knockout to install the CD/DVD burner.
This series DVR is compatible with various burner brands popular in today’s market.
You can consult our local technical support or visit our website for more information.
3.4
3.4 3.4
3.4 D
D D
Desktop and Rack
esktop and Rack esktop and Rack
esktop and Rack M
M M
Mounting
ounting ounting
ounting
3.4.1 Desktop Mounting
To prevent surface damage, please make sure that the rubber feet are securely
installed on the four corners of the bottom of the unit.
Position the unit to allow for cable and power cord clearance at the rear of the unit.
Please make sure that the air flow around the unit is not obstructed.
3.4.2 Rack Mounting
The DVR occupies 1.5 rack units (1.5U) of vertical rack space.
8