IC Realtime Max 16, User Manual

Page: 46 / 140

©2009 IC Realtime, Inc. 46
4.6 4.6 4.6 4.6 AAAAlarm Setup and Alarm Activation larm Setup and Alarm Activation larm Setup and Alarm Activation larm Setup and Alarm Activation
All alarm devices should be properly connected prior to configuring alarm settings.
4.6.1 Alarm Menu
In the main menu, click Setting then Alarm. You can see an interface is shown as
in Figure 4-21.
4.6.2 Alarm setup
Alarm interface is shown as below. See Figure 4-21.
Alarm in: Select channel number.
Event type: There are two types: local input/ network input.
Type: Normal open or normal close.
PTZ activation: Setup PTZ movement when alarm occurs, such as go to a preset,
tour or pattern when there is an alarm. Click “ select ” button, you can see an
interface is shown as in Figure 4-25.
Period: Click set button you can see an interface is shown as in Figure 4-23. Here
you can set business days and non-business days. In
Figure 4-26, click set button, you can see an interface is shown as in
Error!
Reference source not found.
. Here you can set your own setup for business day
and non-business day.
Anti-dither: Here you can set anti-dither time.
Show message: System can provide pop up notifications in the local host screen
if this function is enabled.
Send email: Enable email notifications for alarm occurrences.
Record channel: you can select proper channel to record alarm video (Multiple
choices). At the same time you need to set alarm record in schedule interface
(Main Menu->Setting->Schedule) and select schedule record in manual record
interface (Main Menu->Advance->Manual Record).
Latch: This is where you can set proper delay duration. Value ranges from 10 to
300 seconds. System automatically delays specified seconds in turning off alarm
and activated output after external alarm cancelled.
Tour: Here you can enable tour function when alarm occurs. It is a one-window
tour: Please go to chapter 5.3.9 Display for tour interval setup.
Please highlight icon to select the corresponding option. After completing all
the setups please click save button, system goes back to the previous menu.