IC Realtime Max 16, User Manual

Page: 22 / 140

©2009 IC Realtime, Inc. 22
The hardware necessary to mount the DVR into a rack is supplied with the unit.
Use three (3) screws on each side to fix the unit firmly.
Make sure the installation environment is below 55
℃.
Rear doors may be used only on rack columns that are more than 6 inches (15cm)
deep.
Install the cabinet in ventilated place. Avoid extreme heat, humid or dusty conditions.
You can use a soft dry brush to clean opening outlet, cooling fan and etc regularly.
3.5
3.5 3.5
3.5 Connecting
Connecting Connecting
Connecting Power
Power Power
Power Supply
Supply Supply
Supply
Please check the input voltage and device power button is match or not. .
We recommend you use UPS to guarantee steady operation, DVR life span, and
other peripheral equipments operation such as cameras.
3.6
3.6 3.6
3.6 C
C C
Connecting
onnecting onnecting
onnecting V
V V
Video
ideo ideo
ideo IIIInput
nput nput
nput and
and and
and O
O O
Output
utput utput
utput D
D D
Devices
evices evices
evices
3.6.1 Connecting Video Input
The DVR automatically detects the video standard (PAL or NTSC) whenever you
connect a video input. It accepts both color and black-and-white video.
NOTE:
Enabling line lock on cameras may cause video distortion. There may be noise in
the camera ’ s power source. If video from one or more cameras is distorted, we
recommend you disable the line lock on the camera.
If a video distribution amplifier is installed between the video source and the DVR,
do not set the output video level above 1 Vp-p.
To connect each video input:
1. Connect a coaxial cable to the camera or other analog video source.
2. Connect the coaxial cable to the video in connector on the rear panel.
Please refer to Figure 3-1 for more information.
NOTE:
You need to use a BNC installation tool to connect coaxial cables to the rear panel.
Figure 3-1
3.6.2 Connecting Video Output