IC Realtime Max 16, User Manual

Page: 49 / 140

©2009 IC Realtime, Inc. 49
Figure 4-26
Click start button, system begins burning. At the same time, the start button
becomes stop button. You can view the remaining time and process bar at the left
bottom. See
Error! Reference source not found.
.
Figure 4-27
Tips:
During the backup process, you can click ESC to exit the current menu; however,
the system will not terminate the backup process.
Note:
When you click stop button during the burning process, there are two conditions
for different devices:
For a CD/DVD burner, the stop function becomes activated immediately and
there will be no data burned.
For a USB device, you will have as much data as processed within the burning
time.
The file name format usually is: SN_CH+channel time Y+M+D+H+M+S.
In the file name, the YDM format is the same as you set in general interface.
(Main Menu ->Setting ->General).You can visit our website to view listed CD-
ROM type.
4.8 4.8 4.8 4.8 PTZ Control and Color Setup PTZ Control and Color Setup PTZ Control and Color Setup PTZ Control and Color Setup
Note:
All the operations here are based on PELCO D1 protocol.
4.8.1 Cable Connection
Please follow the procedures below to go on cable connection
Connect the dome ’ s RS485 cable to the DVR ’ s RS485 port. A is (+)positive. B is
(-) negative
Connect the dome ’ s video output cable to the DVR ’ s video input port.
Connect power adapter to the dome.
4.8.2 PTZ Setup
Note:
The camera video should be in the current screen. Before setup, please
check the following connections are correct: