IC Realtime Max 16, User Manual

Page: 14 / 140

©2009 IC Realtime, Inc. 14
2222 Overview and Controls Overview and Controls Overview and Controls Overview and Controls
This section provides information about the front panel and the rear panel.
Please refer to this section first after installation.
2.1
2.1 2.1
2.1 Front Panel
Front Panel Front Panel
Front Panel
Please refer to
Error! Reference source not found.
for front panel information.
Figure 2-1
SN Button Name
Icon
Function
Channel indication
light 1-8
9-16
When system is recording the corresponding channel lights
become on.
Standby indication
light
Status
When DVR is standing by, this lamp turns on.
Remote control
signal receiver
ACT
To receive signals from remote control.
1
Power indication
light Power
The power indication light becomes on after system boots
up.
Go back to previous menu or cancel current operation in
function menu interface.
Cancel
Esc
In video playback mode, click this button to go back to
real-time monitor mode.
In 1-ch monitor mode: pop up assistant function
：
PTZ
control and Video color
In motion detection interface, working with direction keys
to finish setup.
Clear: Press Fn for 1.5 seconds to clear all contents in
current text box.
In preview interface (There is no other menu), click this
button for 3 seconds to switch between TV/VGA.
In text box input mode, press this button to switch
between numeral/English character (small/capitalized).
Assistant
Fn
Special combined operation in some menus.
In input mode, switch between numeral/character and
other function keys.
Shift
Shift
In four-window preview mode, it can work as Fn button.
2
Record
Rec
Enable or disable record function manually. In record
control menu, working with direction keys to select
1 2 3 4 5