IC Realtime Max 16 User Manual Download Page 74

Page: 74 / 140

Event type: There are several options for event triggers such as disk error, no

disk and etc.

Alarm output: alarm activation output port (multiple choices).

Latch: Here you can set a delay time. The value ranges from 10s-300s. The

system automatically delays the specified seconds in turning off alarm and
activated output after the external alarm ends.

Show message: the system can pop up a message in the local screen to alert

you when an alarm occurs.

Send email: the system can send out an email alert when an alarm occurs.

Figure 5-31

5.5.3 Alarm Output

Here you can manually configure alarm outputs.

Please highlight icon

to select the corresponding alarm output. See Figure 5-32.

After completing all the setups please click save button, system needs to reboot to
get all the modification activated.

Figure 5-32

5.5.4 Manual Record

Please refer to Chapter 4.2.2 manual record.

Summary of Contents for Max 16













































































































































Search results

Summary of Contents for Max 16

Reviews:

Related manuals for Max 16

Brands by name

Popular brands

IC Realtime Max 16, User Manual

Search results

Summary of Contents for Max 16

Reviews:

Related manuals for Max 16

Brands by name

Popular brands