IC Realtime Max 16, User Manual

Page: 32 / 140

©2009 IC Realtime, Inc. 32
After you logged in, the system is in a live viewing mode. You can see system
date, time and channel name. If you want to change the system date and time,
you can refer to general settings (Main Menu->Setting->General). If you want to
modify the channel name, please refer to the display settings (Main Menu-
>Setting->Display)
Note: Please refer to the following sheet for channel status. stands for
enabled tour function, stands for a disabled tour.
4.2.2 Manual record
Note:
You need to have proper rights to perform the following operations.
4.2.2.1 Manual record menu
There are two ways for you to go to the manual record menu.
Right click mouse or go to the Main Menu -> Advanced->Manual Record.
In live viewing mode you can press the record button on the front panel. You can
also press record on the remote control.
4.2.2.2 Basic operation
There are three statuses: schedule/manual/stop. Highlight icon
“○” to select
corresponding channel.
Manual: the highest priority. After manual setup, all selected channels will begin
continuous recording.
Schedule: channel records as you defined in the recording setup (Main Menu-
>Setting->Schedule)
Stop: all channels stop recording.
Note:
Manual operation has the highest priority.
Figure 4-5
4.2.2.3 Enable/disable record
Please check current channel status:
“○”
means it is not in recording status,
“●”
means it is in recording status.
Use either the mouse or the directional keys to highlight a channel number.
1 11 1
Recording status
3 33 3
Video loss
2 22 2
Motion detection
4 44 4
Camera lock