IC Realtime Max 16, User Manual

Page: 40 / 140

©2009 IC Realtime, Inc. 40
Please highlight icon to select the corresponding function.
At the bottom of the menu, there are color bars for your reference. Green stands
for regular recording, yellow stands for motion detection and red stands for alarm
recording.
After completing all the setups please click save button.
4.4.1.1 Quick Setup
This function allows you to copy one channel setup to another. After setting in
channel 1, you can click paste button and turn to channel 2 and then click copy.
You can finish setting for one channel and then click save, or you can finish all
setup and then click save, to memorize all the settings.
4.4.1.2 Redundancy
Redundancy function allows you to memorize recorded files to one or several
disks. These files are created, packaged and closed simultaneously. If there is a
drive failure, there will be a spare copy on the other disk. You can use this
function to maintain data reliability and safety.
In the main menu navigate from Setting to Schedule. Highlight the redundancy
button to enable this function. See Figure 4-12.
In the main menu navigate from Advanced to HDD management and you can
assign one or more disk(s) as redundant. You can select from the dropdown list.
See Figure 4-13. System auto overwrites old files once hard disk is full.
Please note that only read/write disks or read-only disks can backup a file and
support file search function, so you need to have at least one read-write disk;
otherwise you can not record video.
Note
About redundancy setup:
If the current channel is not recording, the current setup will be activated when
the channel begins recording the next time.
If the current channel is recording, the current setup will be activated right away.
The current file will be a packet and a form file, then the system will be recording
as you have just defined.
After completing all the setups please click save button, system goes back to the
previous menu.