IBM System Storage TS3310, Maintenance Information

Page: 221 / 531

Type of Firmware Operator Panel Web User Interface SCSI/Fibre Interface
Drive Tools->Drive
Mgmt->Update
Drive Firmware
(using an FMR
cartridge)
Service
Library->View/
Update Drive
Firmware Level
(This
operation can take as
long as 25 minutes
for a single drive and
35 minutes for two to
eighteen drives).
“Using the ITDT
SCSI Firmware
Update, Dump
Retrieval and Drive
Test Tool” on page
7-27 or “Other
Methods for
Updating Drive
Firmware through
the SCSI or Fibre
Channel” on page
7-28
Updating Library Firmware
From the Web User Interface: Service Library
→
View/Update
Library Firmware Level
Note: Ensure your browser pop-up blocker is disabled when updating the library
firmware. Pop-up blockers will prevent the Browse dialog box from
opening.
Administrative users can use the Update Library Firmware Level command to
download firmware to the library. Updating library firmware can be performed
only from the Web User Interface.
Important: Before updating firmware,
v
Resolve and close all open Operator Interventions.
v Save the current system Configuration. See “Saving/Restoring
System Configuration” on page 7-12.
To update library firmware:
1. Download the latest level of library firmware to your host computer by visiting
http://www-1.ibm.com/servers/storage/tape/lto/ .
2.
From the Web User Interface, select Service Library
→
View/Update Library
Firmware Level .
3. Browse to the file on your computer, select the ".tgz" file that was downloaded
from the IBM web site, then click the
Update Firmware button. The Web User
Interface will indicate that the operation has completed. This means that the
firmware file has been successfully moved from the host computer to the
library.
4. Wait for the library to reboot before resuming normal library operations. It will
be several minutes before the library reboots.
5.
Save the current system Configuration. See “Saving/Restoring System
Configuration” on page 7-12
Important: After the update process starts, you must wait until the library reboots.
Do not attempt to interrupt the process in any way, or the upgrade will
not be successful.
Chapter 7. Service Procedures
7-25