Hughes HX200, Installation Manual

Page: 152 / 160

Appendix H • Conforming with standards and directives
142
1038054-0001 Revision B
Consult the dealer or an experienced radio TV technician for
help.
R&TTE notice This product is within the scope of the EU Radio Equipment and
Telecommunications Terminal Equipment (R&TTE) Directive.
Material compliance
RoHS compliance Products supplied to this specification shall conform to
Restriction of Hazardous Substances (RoHS).
The Directive 2002/95/EC of the European Parliament and of the
Council of the 27th January 2003, on the restriction of the use of
certain hazardous substances in electrical and electronic
equipment, requires the reduction of the substances Lead,
Mercury, Cadmium, Hexavalent Chromium, Polybrominated
Biphenyls (PBB), and Polybrominated Diphenyl Ethers (PBDE)
in electronic products by July 1, 2006. Unless otherwise noted, all
materials used must be compliant with this directive and any
subsequent revisions or amendments except Lead.
The maximum acceptable RoHS concentrations are listed in
Table 14:
RoHs compliance with
exemptions
Please note the following exemption of the Directive
2002/95/EC:
Lead in solders for servers, storage and storage array systems,
network infrastructure equipment for switching, signaling,
transmission as well as network management for
CAUTION
This is a class B product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Table 14: Maximum acceptable RoHS concentration
Substance Concentration
Cadmium 0.01% wt (max. concentration by weight in homogenous materials)
Lead 0.1% wt (max. concentration by weight in homogenous materials) Exempted
Mercury: 0.1% wt (max. concentration by weight in homogenous materials)
Hexavalent chromium 0.1% wt (max. concentration by weight in homogenous materials)
PBB 0.1% wt (max. concentration by weight in homogenous materials)
PBDE 0.1% wt (max. concentration by weight in homogenous materials)