Hughes HX200, Installation Manual

Page: 92 / 160

Chapter 5 • The System Control Center
82
1038054-0001 Revision B
Modifying and deleting firewall
rules
You can modify or delete firewall rules at the Firewall
Configuration page. To modify or delete a firewall rule:
1. Click the Modify/Delete link in the leftmost column of a
firewall rule.
The Firewall Rule Configuration page appears, as shown in
Figure 52, with the rule values displayed in the fields. Note
that Figure 52 shows the page with the
Rule Action pull-down
menu displayed.
2. To modify a rule, change the values in one or more of the
fields, then click Save Rule .
3. To delete a rule , click Delete Rule .
Protocol Type TCP
UDP
ICMP
ANY
OTHER This is the Protocol that is encapsulated in the IP packet. A value of
OTHER indicates the value in the
If “Other”, specify Protocol
Number
field should be used.
Source Port
Numbers One or more
comma-separated
Integer values. Up to 5 port numbers separated by commas. If the Protocol Type is
TCP or UDP, you must enter at least one port number in this field
or the
Destination Port Number field.
Destination Port
Numbers One or more
comma-separated
Integer values. Up to 5 port numbers separated by commas may be entered. Only
enter port numbers if
Protocol Type is TCP or UDP.
Table 9: Firewall rule configuration fields (Continued)
Field name Value Description
Figure 52: Modify/delete firewall rule page