Hughes HX200, Installation Manual, Page: 42 / 160

Chapter 3 • Commissioning the HX200 satellite router
32
1038054-0001 Revision B
Entering Transmit Radio
Parameters
Figure 15 shows the Transmit Radio Parameters screen.
1. Enter/verify all parameters as they appear on your work
order.
2. Select the transmit radio used - Saturated or Linear.
Saturated Radio
•
Select either 1 or 2 watts.
•
No other saturated radio selections are required.
Linear Radio
•
Select the radio from the drop-down list. This populates the
following read only fields.
– LO Frequency (MHz)
– Band Lower Edge (MHz)
– Band Upper Edge (MHz)
– Radio Wattage (W)
– Total Gain (dB)
– 1 db G.C.P(dB)
Figure 15: Transmit Radio Parameters screen