Hughes HX200, Installation Manual

Page: 61 / 160

Chapter 3 • Commissioning the HX200 satellite router
1038054-0001 Revision B
51
21. The Registration Server Selection screen appears as shown in
Figure 34.
22. Select the server from the drop-down list on the screen. You
may also manually enter the registration server address by
following these steps:
a. Select the
Enter Registration Server address manually
check box.
b. Enter the registration server’s address in the
HTTP://
field.
c. Select the
Secure HTTP Mode
check box to enable a
secure connection to the registration server.
23. Click Next .
The satellite connection is established.
24. Click Next when prompted to do so.
25. Click OK on the pop-up dialog shown in Figure 35 to access
the registration server.
Figure 34: Registration Server Selection screen
Figure 35: Accessing the registration server