Hughes HX200, Installation Manual

Page: 77 / 160

Chapter 5 • The System Control Center
1038054-0001 Revision B
67
problems exist within the receive path. This may be the result
of adverse weather conditions or a problem with either the
receive cable or the antenna. However; a low number of
frames with errors is no reason for concern, as long as the
number does not increase and the system is functioning
properly.
•
Bad Key Frames –
All data received over the satellite is
encrypted. This field indicates the percentage of received
frames that could not be decrypted successfully. A
continuously increasing value indicates that the satellite
router has not been properly commissioned.
•
Current Modcod –
Indicates the current modulation and
coding scheme used on the HX200 DVB-S2 outroute.
Receive status messages Table 7 lists the messages that may appear in the
Receive Status
field. The Corrective Actions column provides detailed
information about each code and describes any possible
corrective measures.
If a problem cannot be resolved by following the corrective
measures, contact Technical Support.
RxCode 5 indicates that the satellite router is receiving data
properly. This is the code you should see most often.
Note: The messages and associated corrective actions listed
in Table 7 are current only as of this document’s release. To
ensure that you have the most recent information regarding
these messages, click on the blue Reception Info indicator at
the top of the screen and select the Receive Status option.