Hughes HX200, Installation Manual

Page: 16 / 160

Chapter 1 • Introduction
6
1038054-0001 Revision B
Transmitter and receiver
specifications
Tables 3 and 4 list the HX200 transmitter specifications and
receiver specifications, respectively.
Table 3: HX200 Transmitter Specifications
Property Value
Linear transmit radio
L-band output frequency range 950 — 1700 MHz
L-band output with OQPSK modulation
Supported inroutes Up to 6 MSPS turbo coded inroutes
Designed to operate with commercially off-the-shelf L-band
linear BUCs qualified by HNS
IPoS output frequency ranges • 107.42187 - 113.28125 MHz inclusive
• 81.25 - 89.236 MHz inclusive
• 105.078125-109.765625 MHz
• 230.46875 - 234.375 MHz inclusive
Frequency step size 100 Hz
Maximum RF output power 0 dBm at 0 dB TX attenuation
IF coaxial Interface F-type female connector
IF impedance 75 ohm
Transmit power control range 40 dB in 0.5 dB increments
Table 4: HX200 Receiver Specifications
Property Value
IFL cable Accepts block down-converted TDM signal via the IFL cable
Input frequency range 950 MHz - 2150 MHz
QPSK and 8PSK with DVB-S2
DVB-S2 reception up to 45 Msps BCH and LDPC decoding
IF coaxial interface F-type female connector
IF impedance 75 ohm
Minimum input level -74 dBm (per carrier at 1 Msps)
Maximum input level -20 dBm (per carrier at 45 Msps); -8 dBm (composite)
(When using a 1.8m or larger antenna with this indoor unit
(IDU), use 100 ft minimum of RG-11 IFL cable.)