Hughes HX200, Installation Manual

Page: 41 / 160

Chapter 3 • Commissioning the HX200 satellite router
1038054-0001 Revision B
31
– Disabled - Typical installations use this value.
– Enabled
•
Encrypted Traffic Types (drop-down)
Entering Receive Radio
Parameters
Figure 14 shows the Receive Radio Parameters screen.
Enter/verify all parameters as they appear on your work order.
•
Receive LNB Type (drop-down) - Select the LNB is use from
the list. This populates the read only fields with the
characteristics of the selected LNB.
•
LNB 22KHz Switch (drop-down) - Typical installations use
the value the default value of OFF.
•
LNB 10 Mhz On (check-box) - Check the box for LNBs that
require external 10 MHz reference.
•
LO Freq (MHz)
•
Band Lower Edge (MHz)
•
Band Upper Edge (MHz)
Figure 14: Receive Radio parameters