Hughes HN9200, Installation Manual

Page: 65 / 132

The modem saves the parameters and reboots.
Manually accessing the antenna pointing screens
To manually access the antenna pointing screens.
1. Open a web browser on the installer laptop.
2.
Type
http://192.168.0.1/fs/registration/ setup.html
in the browser address bar and press
Enter . The Satellite Setup menu opens ( Figure 44: Satellite Setup menu on page 51).
3. Click Antenna Pointing . The Antenna Pointing screen appears as shown in Figure 46:
Antenna pointing screen on page 53.
4. Select the antenna pointing tool you will use—DAPT, OPI, or N/A (none).
5. Click
Next
.
Figure 46: Antenna pointing screen
6. To continue manual commissioning, follow the steps in:
• Receive antenna pointing – Ka-band on page 37 (Ka-band only)
• Receive antenna pointing – Ku-band on page 41 (Ku-band only)
• Transmit antenna pointing – Ku-band on page 41 (Ku-band only)
Software download—manual commissioning
Prerequisite: Antenna pointing must be completed and validated.
1. Wait for the modem’s operational software to download.
This may take about 15 minutes.
2. To confirm that the download is complete, follow the steps in Confirming that the satellite
modem’s files are up to date on page 56.
The modem is now commissioned.
53
HN9200 Satellite Modem Installation Guide
1038622-0001 Revision B
Chapter 4 Commissioning the satellite modem