Hughes HN9200, Installation Manual

Page: 103 / 132

d) Plug the power cord back into the power source.
e)
If the power source is DC, plug the input cable back into the power supply.
Do not power cycle the satellite modem by
unplugging the power cord from the modem’s rear panel. Doing so could result in static
electricity discharge that could shock you and/or damage the modem.
7. Check the
Web Acceleration Status
field again.
If Web Acceleration is still not operational, contact your service provider for assistance.
Confirming NOC connectivity
Use the Connectivity Test page to check connectivity to the Hughes Network Operations Center
(NOC). You may want to open a second web browser to access the Help page while you execute
a connectivity test.
1. Click Connectivity Test on the System Control Center page to access the Connectivity Test
page.
Figure 74: Connectivity Test – initial page
2. Click Start Test . The Connectivity Test results page appears.
91
HN9200 Satellite Modem Installation Guide
1038622-0001 Revision B
Chapter 8 Troubleshooting