Hughes HN9200, Installation Manual

Page: 55 / 132

Figure 33: Manual cross-polarization warning message
The Cross Pol Test window displays the test status, isolation value, and pass/fail result.
Figure 34: Manual cross-polarization test results
5. Adjust the antenna during the manual cross-polarization test to achieve maximum transmit
isolation.
6. Lock down the antenna adjustment when the modem consistently passes the manual
cross-polarization test.
7. Click Close to close the Cross Pol Test window.
8. On the Transmit Antenna Pointing screen, click Automatic to initiate the ACP test.
9. If the modem fails ACP, re-peak the transmit isolation in manual cross-polarization test
mode.
10. If the modem passes ACP, click Close to close the Cross Pol Test window.
Ku-band pointing is now complete.
11. What you do now depends on whether you are using satellite-based or manual commissioning:
• If you are using satellite-based commissioning, click Next on the Transmit Antenna
Pointing screen to continue.
• If you are following the instructions for Ku-band manual commissioning, click Exit ;
then go to Software download—manual commissioning on page 53.
Registering the satellite modem
To register the satellite modem with the service provider’s network, you select and access a
registration server.
To register the satellite modem:
1. Click
Next
on the Transmit Antenna Pointing screen.
43
HN9200 Satellite Modem Installation Guide
1038622-0001 Revision B
Chapter 4 Commissioning the satellite modem