Hughes HN9200, Installation Manual

Page: 62 / 132

The customer will need this information if they ever need to contact their service provider
for assistance. If no printer is available, advise the customer to record this information and
make sure they know where it is recorded. Make sure the customer knows where this
information is recorded.
4. Click Continue to download configuration parameters to the modem.
A second Registration in Progress screen appears briefly (not shown here) while the
configuration parameters are downloaded. Then the Registration Complete screen appears.
5. Click Restart on the Registration Complete screen.
This restarts the satellite modem.
Figure 43: Registration complete – restarting the modem
The Terminal Reset screen appears. (It is not shown here.)
6. Click Close on the Terminal Reset screen.
The modem is now commissioned.
Manual commissioning
If satellite-based commissioning is not available, you must commission the modem manually.
However, do not use the manual commissioning method unless you are instructed to do so by
the service provider.
Manual commissioning requires coordination between you and the Network Operations Center
(NOC). A technician enters parameters at the NOC, and you enter the same parameters at the
installation site. The NOC also downloads encryption keys and certain parameters to the modem.
Manual commissioning process consists of:
• Entering manual commissioning parameters
• Antenna pointing
For both tasks you use the satellite modem’s web-based interface.
HN9200 Satellite Modem Installation Guide
50
1038622-0001 Revision B
Commissioning the satellite modem Chapter 4