Hughes HN9200, Installation Manual

Page: 93 / 132

Satellite modem status Appearance LED
Receiving data Blinking
Condition preventing receipt of data Off *
Connection established with the NOC On System
Virus protection blocking data Blinking *
Condition preventing full operation Off *
Power is on and the modem is functioning normally On Power
Operating with fallback.bin (backup) version of software Flashing
Modem is not commissioned or has lost its configuration data Blinking
No power Off *
Bold type indicates LED appearance during normal operation when the satellite modem is transmitting or
receiving data.
*Indicates an operational problem.
If it appears the LEDs are not functioning properly, make sure you have the correct power supply.
Refer to
Table 2: Power supply specifications for the HN9200 satellite modem on page 8 for
detailed power supply information.
LAN port LEDs
Green and orange LEDs on the LAN (Ethernet) port on the modem’s rear panel indicate link
status and speed, as explained in
Figure 67: LAN port LEDs on page 81.
Figure 67: LAN port LEDs
Using LEDs for troubleshooting
For information on using the satellite modem’s LEDs for troubleshooting, see:
• Using the front panel LEDs for troubleshooting on page 95
• Using the LAN port LEDs for troubleshooting on page 100
81
HN9200 Satellite Modem Installation Guide
1038622-0001 Revision B
Chapter 7 LEDs