Huber Pilot ONE Unistat T3*0, Operation Manual

Page: 28 / 100

Commissioning
OPERATION MANUAL Chapter 2
Unistat® T300 Series
V2.4.0en/22.07.20//17.12
28
Side
Distance in cm (for operation in a tub)
Air cooling Water cooling
[A1]
Top Air outlet on top of unit: free standing –
[A2]
Top can be located under a bench can be located under a bench
[B]
Left min. 20 min. 20
[C]
Right min. 20 min. 20
[D]
Front min. 20 min. 20
[E]
Rear min. 20 min. 20
2.4.1 EMC-specific notes
Connecting cables in general
Prerequisites for a failure-free operation of the temperature control units incl. their connections with external
applications: Installation and wiring must be carried out professionally. Topics affected: “Electrical safety“ and
“EMC-compliant wiring“.
Cable lengths
For flexible/fixed cable routing longer than 3 meters, the following must amongst other things be observed:
- Equipotential bonding, grounding (see also technical data sheet “Electromagnetic compatibility EMC“)
- Compliance with “external“ and/or “internal“ lightning/overvoltage protection.
- Constructional protective measures, professional cable selection (UV resistance, steel pipe protection, etc.)
Attention:
The responsible body is responsible for compliance with national/international directives and laws. This also
includes the testing of the installation/wiring required by law or standards.
These devices are suitable for the operation in “industrial electromagnetic environments” . It meets
the “immunity requirements” of the currently applicable EN61326-1 , which are required for this
environment.
It also meets the “interference emission requirements” for this environment. It is a Group 1 and
Class A unit according to the currently applicable EN55011 .
Group 1 specifies that high frequency (HF) is only used for the function of a device. Class A specifies
the interference emission limits to be observed.
2.5 Installation conditions
Temperature control unit is connected to the power supply line
DEATH FROM ELECTRICAL SHOCK BY DAMAGE TO THE POWER CABLE.

Do not put temperature control unit on power cable.
Operating the temperature control unit fitted with castors without brakes activated
CRUSHING OF LIMBS

Activate brakes on the wheels.