Huber Pilot ONE Unistat T3*0, Operation Manual

Page: 14 / 100

Introduction
OPERATION MANUAL Chapter 1
Unistat® T300 Series
V2.4.0en/22.07.20//17.12
14
1 Introduction
1.1 Details on the declaration of conformity
The equipment complies with the basic health and safety requirements of the European Directives
listed below:
▪ Machinery Directive
▪ Low Voltage Directive
▪ EMC Directive
1.2 Safety
1.2.1 Symbols used for Safety Instructions
Safety instructions are marked by the below combinations of pictograms and signal words. The
signal word describes the classification of the residual risk when disregarding the operation manual.
Denotes an immediate hazardous situation that will result in death or serious injuries.
Denotes a general hazardous situation that may result in death or serious injuries.
Denotes a hazardous situation that can result in injury.
Denotes a situation that can result in property material damage.
Denotes important notes and usable hints.
Notes in conjunction with Ex px cabinets.
The safety information in this operation manual is designed to protect the responsible body, the
operator and the equipment from damage. Safety instructions appear at the beginning of each
chapter and before instructions. First inform yourself about any residual risks due to misuse before
you start an operation.
Safety information and
procedure