Huber Pilot ONE Unistat T3*0, Operation Manual

Page: 50 / 100

Function description
OPERATION MANUAL Chapter 3
Unistat® T300 Series
V2.4.0en/22.07.20//17.12
50

Read the safety warning and confirm by tapping on “OK”.

Read the Note and confirm by tapping on “OK”.

Tap on the temperature format set by you in the controller (green text).

Enter the displayed red safety code using the numeric keypad that appears.

Enter the value 35 °C for the “Heating OT value” using the numeric keypad that appears.

Confirm your entry by tapping on “OK”.

Read the message and confirm by tapping on “OK”.

Read the safety warning and confirm by tapping on “OK”.

Tap on the temperature format set by you in the controller (green text).

Enter the displayed red safety code using the numeric keypad that appears.

Enter the value 45 °C for the “Exp. vessel OT value” using the numeric keypad that appears.

Confirm your entry by tapping on “OK”. The message “Restart system!” appears on the
>Touchscreen<
[88].

Switch off the temperature control unit. The temperature control unit is reset.