Huber Pilot ONE Unistat T3*0, Operation Manual

Page: 44 / 100

Function description
OPERATION MANUAL Chapter 3
Unistat® T300 Series
V2.4.0en/22.07.20//17.12
44
If after switching the unit off and back on again, the previously set time and date re-appear, it can be
safely assumed that the rechargeable accumulator is defective. In this case, contact Customer Sup-
port. The telephone number can be found on page 98 in section »Contact data« .
3.6.2 Programmable event function
The “Calendar Start” offers a programmable event function. This enables you to enter a time at
which the event is repeatedly triggered on a daily basis (until the activity in the menu is reset). 2
event types are currently selectable:
3.6.2.1 Event function “Alarm clock event”
Several acoustic signals are used.
3.6.2.2 Event function “Program event”
After selecting “Program event” when configuring the event function, you will be prompted for the
number of the program to be started. The program will be started automatically when the pro-
grammed event time is reached. If the temperature control unit is not active, this will also be start-
ed.
3.7 Operation via the touch screen
The entire operation is via the >Touchscreen< [88]. These functions can be activated by tapping the
displayed text boxes/icons once. This also changes the display.
You can cancel the current dialog or dialog sequence at any time by pressing the “ESC” touch
button. When canceling a dialog or dialog sequence, it may be necessary to confirm the cancella-
tion again. When canceling a dialog sequence, settings made earlier in the dialog sequence are
discarded. Check your already carried out settings and re-enter as needed.
3.8 Display instruments
The following meters are available:
▪ >Touchscreen<
[88]
▪ >LED-Indicator Temperature< [90]
▪ >LED-Indicator Flow Chart<
[91]
▪ >LED-Indicator Status< [92]
Display instruments