HP OmniBook 6000 Evaluation Manual Download Page 58

Page: 58 / 207

Making Connections

Using Plug-In Modules

Corporate Evaluator’s Guide

3. Slide the tray back into the module to close it.

If your computer loses power, or if you have removed the CD-ROM or DVD module
from the computer, you can manually open the drive to remove a CD.

•

Insert a straightened paper clip into the recessed hole on the front of the drive.

Note

Windows 95

: Your computer has been configured at the factory to disable CD Auto

Insert notification. This allows your system to suspend on time-out. However, you may
notice that Windows 95 may not automatically detect the insertion of a CD.

Windows 98 and 2000

: Your computer has been configured to enable CD Auto Insert

notification. This does not affect time-outs.

To play DVD movies

If your computer came with a DVD drive, you can install DVD player software that lets
you play DVD movies.

•

Run Setup on the Mediamatics CD to install the player software.

Summary of Contents for OmniBook 6000
















































































































































































































Search results

Summary of Contents for OmniBook 6000

Reviews:

Related manuals for OmniBook 6000

Brands by name

Popular brands

HP OmniBook 6000, Evaluation Manual

Search results

Summary of Contents for OmniBook 6000

Reviews:

Related manuals for OmniBook 6000

Brands by name

Popular brands