manualshive.com logo in svg

HP OmniBook 6000, Evaluation Manual

The HP OmniBook 6000 is a powerful and reliable laptop that comes with a comprehensive Service Manual. This invaluable manual provides step-by-step instructions and helpful tips for troubleshooting and maintaining your device. Download it for free from manualshive.com and enhance your user experience with this exceptional product.

Share
Download
background image

Using Windows 98 

Using the Docking Solutions 

 

110  Corporate Evaluator’s Guide 

Note 

Hot Swap is not supported in the Docking System module bay. You must restart the 
OmniBook when changing modules in the Docking System module bay.  

Hot Docking is not supported with an external video adapter is installed in the Docking 
System. Always shutdown and turn off the OmniBook before docking or undocking the 
OmniBook if you are using an external video adapter. Also do not suspend the 
OmniBook while using an external video adapter. Power Management is not supported 
with an external video adapter.  

To install the HP Notebook docking system support 

If you are going to use the HP Notebook Docking System you must install a new IDE 
driver in Windows 98. Perform this procedure before inserting the HP Notebook into the 
dock. 

The HP Notebook Docking System IDE driver is located on the Recovery CD at 
\HP\DRIVERS\W98\DOCKING\IDE and \HP\DRIVERS\W98\DOCKING\SCSI. 

1.  From the Start menu, click Run, and then enter 

D:\HP\DRIVERS\W98\Docking\IDE\SETUP.EXE and click OK, 

2.  When prompted to install the CMD Bus Master IDE Driver, click Yes. 

3.  When prompted to restart, click No. 

4.  Open a DOS window and type the following: 

 D: 

 CD 

\HP\DRIVERS\W98\DOCKING 

 

COPY HWP2280.INF C:\WINDOWS\INF /Y 

 CD 

SCSI 

 

COPY SYMC8XX.INF C:\WINDOWS\INF /Y 

 

COPY SYMC8XX.MPD C:\WINDOWS\SYSTEM\IOSUBSYS /Y 

5.  Close the DOS window and shut down the HP Notebook. 

6.  Insert the HP Notebook in the HP Notebook Docking System and power on the HP 

Notebook. 

7.  Windows 98 will detect the “PCI standard PCI to PCI bridge”. Click Next to 

continue.  

8.  Click Next to Search for the best driver for your device. 

Summary of Contents for OmniBook 6000
















































































































































































































Reviews:

No comments

Related manuals for OmniBook 6000

Gateway MX6110m Guía Del Usuario preview
MX6110m
Brand: Gateway Pages: 186
Gateway M-6801m Guía Del Usuario preview
M-6801m
Brand: Gateway Pages: 114
Gateway M-6205m Guía De Referencia preview
M-6205m
Brand: Gateway Pages: 192
Gateway MX6650 - Pentium M 1.86 GHz User Manual preview
MX6650 - Pentium M 1.86 GHz
Brand: Gateway Pages: 144
Gateway NV-40 Guía De Referencia preview
NV-40
Brand: Gateway Pages: 150
Gateway M520 Replacement Manual preview
M520
Brand: Gateway Pages: 4
Gateway LT 1000 User Manual preview
LT 1000
Brand: Gateway Pages: 78
Gateway LT 1000 Installation Manual preview
LT 1000
Brand: Gateway Pages: 7
Time Warner Cable SIERRA WIRELESS 250U 4G/3G LAPTOP CARD Quick Start Manual preview
SIERRA WIRELESS 250U 4G/3G LAPTOP CARD
Brand: Time Warner Cable Pages: 5
chiliGREEN A15CR03 User Manual preview
A15CR03
Brand: chiliGREEN Pages: 43
Gateway LT2022u User Manual preview
LT2022u
Brand: Gateway Pages: 52
TCL TAB10 Gen2 Quick Start Manual preview
TAB10 Gen2
Brand: TCL Pages: 14
Dell Inspiron Chromebook 7486 Setup And Specifications preview
Inspiron Chromebook 7486
Brand: Dell Pages: 27
Adam Hall SLT001 User Manual preview
SLT001
Brand: Adam Hall Pages: 2
Toshiba Satellite A305-S6845 Specification preview
Satellite A305-S6845
Brand: Toshiba Pages: 1
Toshiba Satellite A300-SD5 Specifications preview
Satellite A300-SD5
Brand: Toshiba Pages: 2
Toshiba Satellite A300D Series Specifications preview
Satellite A300D Series
Brand: Toshiba Pages: 2
Toshiba Satellite A205-S4638 Brochure preview
Satellite A205-S4638
Brand: Toshiba Pages: 2

Brands by name

Popular brands

Load more brands