manualshive.com logo in svg

HP OmniBook 6000, Evaluation Manual

The HP OmniBook 6000 is a powerful and reliable laptop that comes with a comprehensive Service Manual. This invaluable manual provides step-by-step instructions and helpful tips for troubleshooting and maintaining your device. Download it for free from manualshive.com and enhance your user experience with this exceptional product.

Share
Download
background image

 Using 

Windows 

95 

 

Installing Windows 95 

 

 

Corporate Evaluator’s Guide  125 

4.  Double-click on the W95y2k.exe 

5.  Click Yes to accept the license agreement. 

6.  When the installation is finished, click OK to restart the computer. 

7.  The installation of Internet Explorer will start when the Notebook restarts. 

To install the 2nd HDD accessory module support 

If you intend to use a 2nd HDD in the Module Bay, you will have to update the Windows 
95 hard-disk driver. That update is located on the Recovery CD-ROM in the 
\HP\DRIVERS\W95\PATCHES\ESDI_506. 

1.  Open a MS-DOS Prompt. 

2.  Copy the update from the Recovery CD to C:\WINDOWS\SYSTEM\IOSUBSYS: 

 COPY 

D:\HP\DRIVERS\W95\PATCHES\ESDI_506 

C:\WINDOWS\SYSTEM\IOSUBSYS 

 

Confirm with Y when you are prompted to overwrite the ESDI_506.PDR file. 

3.  Restart the computer. 

To disable automatic CD-ROM detection 

Windows 95 will automatically detect and respond when you insert a CD. However, this 
prevents the HP Notebook from automatically turning off after a period of inactivity if 
the CD-ROM drive is present. To disable this feature: 

1.  From Control Panel, double-click System, then click Device Manager. 

2.  Double-click CD-ROM drive. 

3.  Select the CD-ROM driver displayed, then click Properties. 

4.  Click Settings, then uncheck “Auto Insert Notification”. 

5.  Click OK to close the CD-ROM Properties window. 

6.  Click OK to close the System Properties window. 

7.  Click Yes to restart Windows 95. 

Summary of Contents for OmniBook 6000
















































































































































































































Reviews:

No comments

Related manuals for OmniBook 6000

Gateway M275 Specifications preview
M275
Brand: Gateway Pages: 10
Gateway M275 Service Manual preview
M275
Brand: Gateway Pages: 87
Acer A515-47 User Manual preview
A515-47
Brand: Acer Pages: 77
Fujitsu Siemens Computers Amilo L1310G Datasheet preview
Amilo L1310G
Brand: Fujitsu Siemens Computers Pages: 3
Oregon Scientific B-Book Learning Laptop Instruction preview
B-Book Learning Laptop
Brand: Oregon Scientific Pages: 28
BenQ DHR200 Service Manual preview
DHR200
Brand: BenQ Pages: 32
Toshiba A9-S9012X User Manual preview
A9-S9012X
Brand: Toshiba Pages: 258
Dell Alienware x14 Setup And Specifications preview
Alienware x14
Brand: Dell Pages: 22
Dell Alienware M18x R2 Specifications preview
Alienware M18x R2
Brand: Dell Pages: 1
Clevo N250JU Concise User Manual preview
N250JU
Brand: Clevo Pages: 134
Sony Vaio PCG-V505AX Service And Warranty Information preview
Vaio PCG-V505AX
Brand: Sony Pages: 1
Sony VAIO PCG-TR3F Specifications preview
VAIO PCG-TR3F
Brand: Sony Pages: 1
Sony VAIO PCG-TR3AP3 Specifications preview
VAIO PCG-TR3AP3
Brand: Sony Pages: 1
Sony VAIO PCG-TR3AP2 Specifications preview
VAIO PCG-TR3AP2
Brand: Sony Pages: 1
Sony VAIO PCG-TR1F (Spanish) Ficha De Datos preview
VAIO PCG-TR1F
Brand: Sony Pages: 1
Sony VAIO PCG-SRX51P Specifications preview
VAIO PCG-SRX51P
Brand: Sony Pages: 5
Sony VAIO PCG-SR7K Specifications preview
VAIO PCG-SR7K
Brand: Sony Pages: 1
Sony VAIO PCG-SR5K Specifications preview
VAIO PCG-SR5K
Brand: Sony Pages: 1

Brands by name

Popular brands

Load more brands