manualshive.com logo in svg

HP OmniBook 6000, Evaluation Manual

The HP OmniBook 6000 is a powerful and reliable laptop that comes with a comprehensive Service Manual. This invaluable manual provides step-by-step instructions and helpful tips for troubleshooting and maintaining your device. Download it for free from manualshive.com and enhance your user experience with this exceptional product.

Share
Download
background image

Using Windows NT 4.0 

Installing Windows NT 4.0 

 

136  Corporate Evaluator’s Guide 

Note 

If your Notebook came with an ESS soft modem, SETUP.EXE will also install modem 
drivers. 

2.  Follow the instructions on the screen to install the drivers. 

The drivers will be installed after the system reboots. 

To install pointing device support 

If you’ve installed a retail version of Windows NT, you can install pointing device 
support. 

The integrated pointing device(s) is fully supported by the Synaptics Touchpad driver. 
With the standard PS/2 mouse driver the integrated pointing device(s) will function, but 
will be without most special features. 

The touchpad files are located on the Recovery CD under 
\HP\DRIVERS\NT4\Touchpad.  

1.  Run SETUP.EXE from the \HP\DRIVERS\NT4\Touchpad subdirectory. 

2.  Follow the instructions and restart to complete the installation. 

For more detailed information about the touchpad drivers, see the readme.txt file in the 
touchpad directory. 

To install IDE support 

Windows NT 4.0 installs a generic IDE Controller device driver. To increase 
performance, install the Intel PIIX4 PCI Bus Master IDE Controller driver that’s in the 
\HP\DRIVERS\NT4\PIIX4 directory on the HP Notebook Recovery CD. 

1.  From the Control Panel, double-click on the “SCSI Adapters” icon. 

2.  Click on the folder tab labeled “Drivers”. The currently installed SCSI adapter drivers 

will be listed in the Drivers menu. 

3.  Select the default driver (“IDE CD-ROM (Atapi 1.2)/Dual-Channel PCI IDE”) Then, 

click on the “Remove” button to remove the driver. 

4.  Click Yes to Confirm. 

5.  Click “Add...” to add a new driver. 

6.  From the “Install Driver” dialog box, Click on the “Have Disk” button. 

Summary of Contents for OmniBook 6000
















































































































































































































Reviews:

No comments

Related manuals for OmniBook 6000

Acer 5570-2052 - Aspire - Pentium Dual Core 1.73... Guía Del Usuario preview
5570-2052 - Aspire - Pentium Dual Core 1.73...
Brand: Acer Pages: 128
Dynatech scieneo. amplio VI User Manual preview
scieneo. amplio VI
Brand: Dynatech Pages: 52
TCL TAB10 Gen2 Quick Start Manual preview
TAB10 Gen2
Brand: TCL Pages: 14
Wanlida PC-88001 User Manual preview
PC-88001
Brand: Wanlida Pages: 33
Fujitsu P1610 - LifeBook - Core Solo 1.2 GHz User Manual preview
P1610 - LifeBook - Core Solo 1.2 GHz
Brand: Fujitsu Pages: 128
Microsoft Surface 3 Pro Removal Manual preview
Surface 3 Pro
Brand: Microsoft Pages: 25
Microsoft Surface Book 3 Manual preview
Surface Book 3
Brand: Microsoft Pages: 28
MSI U160 User Manual preview
U160
Brand: MSI Pages: 90
MSI Megabook M655 Getting Started preview
Megabook M655
Brand: MSI Pages: 80
MSI Megabook M635 Getting Started preview
Megabook M635
Brand: MSI Pages: 74
MSI FX610 User Manual preview
FX610
Brand: MSI Pages: 102
HP Pavilion g4 Specifications preview
Pavilion g4
Brand: HP Pages: 2
HP Pavilion dv9900 Series Brochure & Specs preview
Pavilion dv9900 Series
Brand: HP Pages: 8
HP Pavilion dv6900 Series Specifications preview
Pavilion dv6900 Series
Brand: HP Pages: 2
HP Pavilion dv6760ea Specification Sheet preview
Pavilion dv6760ea
Brand: HP Pages: 2
HP PAVILION DV7 Disassembly Instructions preview
PAVILION DV7
Brand: HP Pages: 4
HP Pavilion DV6 Series Keyboard Removal Manual preview
Pavilion DV6 Series
Brand: HP Pages: 5
HP Pavilion DV7-2170 User Manual preview
Pavilion DV7-2170
Brand: HP Pages: 25

Brands by name

Popular brands

Load more brands