HP OmniBook 6000, Evaluation Manual

Page: 119 / 207

Using Windows 95
Installing Windows 95
Corporate Evaluator’s Guide 119
11. Do not detect any CD-ROM drive, Network, Sound, MIDI, or Video Capture Card
devices, then click Next.
12. Select “Install The Most Common Components (recommended)”, then click Next.
13. Click “No, I do not want a startup disk”, then click Next.
14. Click Next to start Copying Windows 95 Files to Your Computer.
15. When prompted, click Finish to restart Windows 95.
16. The Windows 95 Setup Wizard will now configure hardware, Control Panel,
programs on the Start menu, Windows help, the MS-DOS program settings, Time
Zone, and Microsoft Exchange. Enter any changes when the system displays the Time
Zone screen. If you chose Microsoft Exchange during the installation, enter the
information or click Cancel to enter it later.
17. When prompted to set up a printer, install your printer or click Cancel.
18. Click OK to restart the HP Notebook. IE 4.0 will be installed after you restart the
Notebook
19. Insert the first HP Notebook Recovery CD-ROM of the set.
20. Open Windows Explorer.
21. Click View, then Folder options.
22. Select “Show all files” under View, uncheck “Hide file extensions for known file
types”, then click OK.
23. Copy (drag and drop) the files from the Recovery CD in
\HP\DRIVERS\W95\PIIX4UPD to C:\WINDOWS\INF by highlighting and dragging
all files. (If prompted, click Yes to All to replace all files.)
24. From Control Panel, double-click System, then click Device Manager.
25. Remove the “PCI Bridge” devices (not PCI CardBus Bridge devices) from the “Other
devices” category. Click OK in the Confirm Device Removal dialog box.
26. There are two items in “Hard disk controllers” category that must be removed in the
correct order. Remove the “Standard Dual PCI IDE Controller” from the “Hard disk
controllers”. Click OK in the Confirm Device Removal dialog box.
27. When prompted to restart Windows 95, click No.
28. Remove the “Standard IDE/ESDI Hard Disk Controller” from the “Hard disk
controllers.” Click OK in the Confirm Device Removal dialog box.
29. Close the System Properties window.