HP OmniBook 6000 Evaluation Manual Download Page 130

Page: 130 / 207

Using Windows 95

Installing HP/3Com 10/100 E 56K Global Modem Mini-PCI Card
Support

130 Corporate Evaluator’s Guide

14. Browse to Windows cab (Windows\Options\CABS) files on the Windows 95

installation CD.

15. Click OK.

16. Follow the instructions on the screen to complete the installation.

17. Restart your computer.

To install modem support

If you have installed retail Windows and your HP Notebook contains a built-in 3Com
56K V.90 Mini PCI Modem, you need to install the modem drivers. The modem drivers
are contained in the \HP\DRIVERS\W95\MODEM\3COM subdirectory.

1. Open the Device Manager: Right-click on My Computer and select Properties, and

then click the Device Manager tab.

2. Select “Other Devices” and double-click on “PCI Communication Device.”

3. Click the Driver Tab and click “Update Driver.”

4. Click Yes (recommended).

5. Click “Other Locations.”

6. Browse to Modem driver directory: \HP\Drivers\95\Modem\3COM.

7. Click Finish.

8. Click OK.

Summary of Contents for OmniBook 6000
















































































































































































































Search results

Summary of Contents for OmniBook 6000

Reviews:

Related manuals for OmniBook 6000

Brands by name

Popular brands

HP OmniBook 6000, Evaluation Manual

Search results

Summary of Contents for OmniBook 6000

Reviews:

Related manuals for OmniBook 6000

Brands by name

Popular brands