manualshive.com logo in svg

HP OmniBook 6000, Evaluation Manual

The HP OmniBook 6000 is a powerful and reliable laptop that comes with a comprehensive Service Manual. This invaluable manual provides step-by-step instructions and helpful tips for troubleshooting and maintaining your device. Download it for free from manualshive.com and enhance your user experience with this exceptional product.

Share
Download
background image

 Making 

Connections 

 

Connecting External Devices 

 

 

Corporate Evaluator’s Guide 

75 

To make an infrared connection 

Your computer includes an infrared port—located below the volume control on the right 
side of the computer—which provides wireless, serial communication between the 
computer and other infrared devices such as printers or other computers.  

By default, the infrared port is not enabled, so you must enable it before you can use it. 

• 

Windows 95

: Enable the infrared port in the BIOS Setup utility, then install the 

infrared driver. For more information, see the Readme file located in C:\hp\Drivers. 

• 

Windows 98 and Windows 2000

: Enable the infrared port in the BIOS Setup utility 

(the computer reboots automatically when you save and exit). The infrared drivers 
then install automatically on Windows 98 and 2000 during reboot. For more 
information, see the Readme file located in C:\hp\Drivers. 

Using the infrared port 

• 

Make sure the infrared ports of your computer and the other device lie in as straight a 
line as possible. The two ports should be no more than 1 meter apart, with no 
obstructions in between. Noise from nearby equipment can cause transmission errors. 

• 

To check the status of communications, click Start, Settings, Control Panel, then 
double-click Infrared (Windows 95 and 98) or Wireless Link (Windows 2000). 

• 

Disable infrared communication when you aren’t using it, and especially before 
suspending or docking: 

1.  Close any applications that are using infrared, and any folders on an infrared link. 

2.  Click Start, Settings, Control Panel. 

3. 

Windows 95 or 98

: Double-click Infrared and disable communications. 

Windows 2000

: Double-click Wireless Link and disable the hardware. 

Printing to an infrared printer 

• 

Install your printer and assign it to the computer’s infrared port. You can then print 
from your applications as you would to any other printer. 

Transferring files through an infrared connection 

You can use your computer’s infrared port to transfer files. In Windows 2000, you can 
use Wireless Link. In Windows 95 or Windows 98, you can using the built-in Direct 

Summary of Contents for OmniBook 6000
















































































































































































































Reviews:

No comments

Related manuals for OmniBook 6000

Samsung NP600B4C User Manual preview
NP600B4C
Brand: Samsung Pages: 143
Samsung NP550P5C User Manual preview
NP550P5C
Brand: Samsung Pages: 122
Tandy 102 Service Manual preview
102
Brand: Tandy Pages: 110
IBM ThinkPad 380Z Hardware Maintenance Manual preview
ThinkPad 380Z
Brand: IBM Pages: 104
IBM ThinkPad 240 Compatibility Manual preview
ThinkPad 240
Brand: IBM Pages: 4
IBM 600E - ThinkPad 2645 - PII 400 MHz Quick Reference preview
600E - ThinkPad 2645 - PII 400 MHz
Brand: IBM Pages: 2
IBM 365xX Hardware Maintenance Manual preview
365xX
Brand: IBM Pages: 222
Rugged Computing ATLAS slim 14 Assembly Manual preview
ATLAS slim 14
Brand: Rugged Computing Pages: 43
MAXDATA PRO 8100 IS User Manual preview
PRO 8100 IS
Brand: MAXDATA Pages: 44
Gateway NV75S02u User Manual preview
NV75S02u
Brand: Gateway Pages: 118
Samsung NP754XFG-KB2US User Manual preview
NP754XFG-KB2US
Brand: Samsung Pages: 108
Acer Aspire One N57DQBB Generic User Manual preview
Aspire One N57DQBB
Brand: Acer Pages: 1810
Lenovo 019626U Brochure preview
019626U
Brand: Lenovo Pages: 4
Lenovo 019624U Hardware Maintenance Manual preview
019624U
Brand: Lenovo Pages: 126
Lenovo 019626U Hardware Maintenance Manual preview
019626U
Brand: Lenovo Pages: 148
Lenovo 019923U Hardware Maintenance Manual preview
019923U
Brand: Lenovo Pages: 158
Lenovo 019727U Hardware Maintenance Manual preview
019727U
Brand: Lenovo Pages: 184
Lenovo 01994JU Hardware Maintenance Manual preview
01994JU
Brand: Lenovo Pages: 196

Brands by name

Popular brands

Load more brands