HP OmniBook 6000 Evaluation Manual Download Page 14

Page: 14 / 207

Introducing the Notebook Computer

Taking Inventory

Corporate Evaluator’s Guide

•

Weight-saving module, for module bay to reduce travel weight.

•

External battery charger.

•

Docking bay adapter.

To find more information

The following table lists other sources of information about your computer and related
products.

Source Description

and

Location

Startup Guide

The

Startup Guide

introduces your computer. It also contains setup instructions,

basic operation guidelines, troubleshooting information, and warranty information.

Online

Reference

Guide

The full

Reference Guide

is shipped on the computer’s hard drive, and provides a

complete source for operating and maintaining the computer. Look in the HP Library
group, or on the

Recovery CD

in \hp\Library.

Online HP Notes

For late-breaking information available after the manuals were completed, see the
HP Notes in the online HP Library, or on the

Recovery CD

in \hp\Library.

Microsoft Windows
manual

This is shipped with your computer and contains information about using the version
of Microsoft Windows shipped with your computer.

HP Notebook Web
Site

www.hp.com/notebooks.
www.europe.hp.com/notebooks (European mirror).

HP Customer Care
Web Site

www.hp.com/go/support.

Corporate
Evaluator’s Guide

This provides information about installing alternate operating systems, as well as
how to configure your notebook computer in a corporate, networked environment.
Located at the HP Notebook Web site.

Summary of Contents for OmniBook 6000
















































































































































































































Search results

Summary of Contents for OmniBook 6000

Reviews:

Related manuals for OmniBook 6000

Brands by name

Popular brands

HP OmniBook 6000, Evaluation Manual

Search results

Summary of Contents for OmniBook 6000

Reviews:

Related manuals for OmniBook 6000

Brands by name

Popular brands