HP OmniBook 6000, Evaluation Manual

Page: 98 / 207

Using Windows 2000
Installing Windows 2000
98 Corporate Evaluator’s Guide
4. Restart the computer.
Note
Reset your video settings to 1024 x 768 if needed.
To install the Intel® SpeedStep™ Technology applet
If you’ve installed a retail version of Windows, you’ll need to install the Intel®
SpeedStep™ technology Applet if you have a dual-speed Pentium III processor.
The Intel SpeedStep files are located on the Recovery CD under
\HP\DRIVERS\W2K\SPEEDSTP.
1. Double-click SETUP.EXE in the SpeedStep directory.
2. When prompted, click NEXT.
3. Click FINISH to reboot your computer.
To configure power management
You may want to change the default power management settings in Windows 2000. The
BIOS Power Management settings are ignored if ACPI is activated.
1. From Control Panel, double-click Power Options.
2. Click the Hibernate tab.
3. Check Enable hibernate support.
4. Click Apply.
5. Click the Power Schemes tab.
6. Change the Plugged in option for Standby to never
7. Change the Plugged in option for Hibernate to 4 hours.
7. Click the Advanced tab.
8. Check Always show icon on the taskbar.
9. Click Apply.
10. Change the Power buttons options to your desired settings.
11. Click the Alarms tab.