manualshive.com logo in svg

HP OmniBook 6000, Evaluation Manual

The HP OmniBook 6000 is a powerful and reliable laptop that comes with a comprehensive Service Manual. This invaluable manual provides step-by-step instructions and helpful tips for troubleshooting and maintaining your device. Download it for free from manualshive.com and enhance your user experience with this exceptional product.

Share
Download
background image

 

Using Windows NT 4.0 

Installing HP/3Com 10/100 E 56K Global Modem Mini-PCI Card Support 

 

 

Corporate Evaluator’s Guide  143 

Installing HP/3Com 10/100 E 56K Global Modem 
Mini-PCI Card Support 

This section describes how to: 

•

 Install 

Ethernet 

support. 

•

 Install 

modem 

support. 

To install Ethernet support 

If you have installed retail Windows and your HP Notebook contains a built-in 3Com 
10/100 Mini PCI Ethernet Adapter, you need to install the LAN drivers. The LAN drivers 
are contained in the \HP\DRIVERS\NT4\LAN subdirectory. 

Before you begin, create a directory on C: called “OPTIONS” and copy the i386 
directory of the Windows NT installation CD into the C:\OPTIONS directory. 

The following Windows NT setup procedure assumes that networking has not been 
installed on your computer. 

Before setting up the adapter, you will need to know: 

•

  Your network file server name, network account user name, and password 

•

  Protocol used in the Microsoft Windows network (NWLink IPX/SPX Compatible 

transport, TCP/IP protocol, NetBEUI protocol) 

•

  NT Server domain or workgroup to which you belong 

•

  Your IP address (unless you are using DHCP) 

Follow these steps to install the 3Com 10/100 Mini PCI Ethernet Adapter driver when 
networking has not been installed: 

1.  In the Control Panel, double-click Network. 

2.  When the system prompts: “Windows NT Networking is not installed. Do you want 

to install it now?”, click Yes. This opens the Network Setup Wizard. 

3.  Check Wired to the network, and then click Next. 

4.  When the system prompts to have setup start searching for a network adapter, click 

Select from list. 

Summary of Contents for OmniBook 6000
















































































































































































































Reviews:

No comments

Related manuals for OmniBook 6000

IBM ThinkPad R40e Servisna Navodila In Navodila Za Odpravljanje Težav preview
ThinkPad R40e
Brand: IBM Pages: 94
IBM ThinkPad R40e Příručka Pro Základní Servis A Odstraňování Problém preview
ThinkPad R40e
Brand: IBM Pages: 102
IBM ThinkPad R40e Manual Til Service Og Fejlfinding preview
ThinkPad R40e
Brand: IBM Pages: 96
IBM ThinkPad R40e Guida All’Assistenza E Alla Risoluzione Dei Problemi preview
ThinkPad R40e
Brand: IBM Pages: 96
IBM ThinkPad R40e Manual De Assistência E Resolução De Problemas preview
ThinkPad R40e
Brand: IBM Pages: 98
IBM ThinkPad R40 Hardware Maintenance Manual preview
ThinkPad R40
Brand: IBM Pages: 178
IBM ThinkPad i Series Manual preview
ThinkPad i Series
Brand: IBM Pages: 162
IBM ThinkPad X30, ThinkPad X31 (MT 2672 Hardware Maintenance Manual preview
ThinkPad X30, ThinkPad X31 (MT 2672
Brand: IBM Pages: 138
IBM THINKPAD A30 Guía De Servicio Y De Resolución De Problemas preview
THINKPAD A30
Brand: IBM Pages: 94
IBM THINKPAD I 1200 - User Manual preview
THINKPAD I 1200 -
Brand: IBM Pages: 162
Logik LUPAUSL13E Instruction Manual preview
LUPAUSL13E
Brand: Logik Pages: 52
Razer RZ09-0196 User Manual preview
RZ09-0196
Brand: Razer Pages: 18
FIC KR2W User Manual preview
KR2W
Brand: FIC Pages: 128
NEC VERSA LXI - VERSION 02-2000 Manual preview
VERSA LXI - VERSION 02-2000
Brand: NEC Pages: 204
Hena CW14Q7B User Manual preview
CW14Q7B
Brand: Hena Pages: 7
Dell Inspiron 14 5458 Service Manual preview
Inspiron 14 5458
Brand: Dell Pages: 101
Dell Inspiron 120L Quick Reference Manual preview
Inspiron 120L
Brand: Dell Pages: 190
Dell G7 7790 Service Manual preview
G7 7790
Brand: Dell Pages: 101

Brands by name

Popular brands

Load more brands