HP OmniBook 6000 Evaluation Manual Download Page 170

Page: 170 / 207

Troubleshooting Your Computer

Testing the Hardware

170 Corporate Evaluator’s Guide

8. Select and run the appropriate tests. Tests are not listed if no such hardware is

detected. Press the following keys to run tests:

ENTER

Runs the highlighted test.

F5 or
SPACE

Marks or unmarks the highlighted test.

Marks or unmarks all tests in the current
menu.

Marks or unmarks all tests in all menus.

F10

Runs all marked tests.

9. When you are finished running tests, press ESC to exit the advanced tests.

10.

Optional: Save the Support Ticket.

Press F4 to save system and test information in

the Support Ticket log file.

11.

Exit.

Press F3 to exit and reboot.

12.

Optional: Check the log.

The log file contains a list of all test results and errors. Run

C:\Dmi\Hpdiags\Hpsuppt.exe to retrieve the log file to this directory and open it in
Notepad. (If Hpsuppt.exe is not on your hard disk, you can download it from the HP
Customer Care Web site, www.hp.com/go/support.)

Summary of Contents for OmniBook 6000
















































































































































































































Search results

Summary of Contents for OmniBook 6000

Reviews:

Related manuals for OmniBook 6000

Brands by name

Popular brands

HP OmniBook 6000, Evaluation Manual

Search results

Summary of Contents for OmniBook 6000

Reviews:

Related manuals for OmniBook 6000

Brands by name

Popular brands