manualshive.com logo in svg

HP ML370 - ProLiant - G3, Reference And Troubleshooting Manual

The HP ML370 ProLiant G3 is a powerful server designed for optimal performance and reliability. With our comprehensive user manual, you'll have a detailed overview of its features and functions. Download it for free from our website, and get started with this exceptional product right away.

Share
Download
background image

206 

 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide 

 

Drive (Bay) X Upload Code Not Readable 

Description: An error occurred while ADU was trying to read the upload code 
information from this drive. 

Action: If multiple errors occur, the drive may need to be replaced. 

 

Drive (Bay) X Was Inadvertently Replaced 

Description: The physical drive was incorrectly replaced after another drive 
failed. 

Action: 

  CAUTION:  Do not run the server setup utility and try to 

reconfigure, or data will be lost. 

1.  Replace the drive that was incorrectly replaced. 

2.  Replace the original drive that failed. 

 

Drive Monitoring Features Are Unobtainable 

Description: ADU is unable to get monitor and performance data due to a fatal 
command problem (such as drive time-out), or is unable to get data due to these 
features not being supported on the controller. 

Action: Check for other errors such as time-outs. If no other errors occur, 
upgrade the firmware to a version that supports monitor and performance, if 
desired. 

 

Drive Monitoring is NOT Enabled for SCSI Port X Drive ID Y 

Description: The monitor and performance features have not been enabled on 
this drive. 

Action: Run the server setup utility to initialize the monitor and performance 
features. 

 

 

Summary of Contents for ML370 - ProLiant - G3






























































































































































































































































































































Reviews:

No comments

Related manuals for ML370 - ProLiant - G3

Gateway ALR 7300 Maintaining And Troubleshooting preview
ALR 7300
Brand: Gateway Pages: 138
Hama FlashPen "Piko" Operating Instruction preview
FlashPen "Piko"
Brand: Hama Pages: 4
SMC Networks Barricade SMC7901WBRA2 Installation Manual preview
Barricade SMC7901WBRA2
Brand: SMC Networks Pages: 2
ProCurve J8454A Quick Start Manual preview
J8454A
Brand: ProCurve Pages: 2
VoiceLine InnoMedia MTA 3328-2R Getting Started Manual preview
InnoMedia MTA 3328-2R
Brand: VoiceLine Pages: 18
Buffalo HD-H0.6TGL User Manual preview
HD-H0.6TGL
Brand: Buffalo Pages: 80
Quantum ActiveScale P100E3 Support Manual preview
ActiveScale P100E3
Brand: Quantum Pages: 28
Quictent WGB-01 User Manual preview
WGB-01
Brand: Quictent Pages: 24
SmartBridges airHaul Nexus sB3010 User Manual preview
airHaul Nexus sB3010
Brand: SmartBridges Pages: 80
Infoblox Infoblox-250 Installation Manual preview
Infoblox-250
Brand: Infoblox Pages: 16
Sun Microsystems Netra ft 1800 Installation Manual preview
Netra ft 1800
Brand: Sun Microsystems Pages: 90
Chase Research IOLINK-130 Installation & Application Manual preview
IOLINK-130
Brand: Chase Research Pages: 114
iNetVu Tachyon CI1300 Quick Start Manual preview
Tachyon CI1300
Brand: iNetVu Pages: 20
Quantum DXi6500 series Planning Manual preview
DXi6500 series
Brand: Quantum Pages: 20
ADTRAN 1202880E1 Quick Start Manual preview
1202880E1
Brand: ADTRAN Pages: 4
I-O DATA FIDATA HFAS1-S10U Setup Manual preview
FIDATA HFAS1-S10U
Brand: I-O DATA Pages: 46
Open House H634 Manual preview
H634
Brand: Open House Pages: 2
Hanwha Vision SPA-S2000 Quick Manual preview
SPA-S2000
Brand: Hanwha Vision Pages: 16

Brands by name

Popular brands

Load more brands