manualshive.com logo in svg

HP ML370 - ProLiant - G3, Reference And Troubleshooting Manual

The HP ML370 ProLiant G3 is a powerful server designed for optimal performance and reliability. With our comprehensive user manual, you'll have a detailed overview of its features and functions. Download it for free from our website, and get started with this exceptional product right away.

Share
Download
background image

272 

 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide 

 

• 

Audible Beeps: None 

• 

− 

• 

Replace the failed drive and press the F1 key to rebuild the array. If the drive 
rebuild is not successful or is aborted because the system rebooted before the 
rebuild of the drive completed, another version of the 1786 POST error 
message will be displayed. Refer to the following message. 

 

1786-Slot 1 Drive Array Recovery Needed. Automatic Data Recovery 
Previously Aborted!... 

...The following SCSI drive(s) need Automatic Data Recovery: SCSI Port Y: SCSI ID Z 

Select F1 to retry Automatic Data Recovery to drive. Select F2 to continue without starting 
Automatic Data Recovery. 

Possible Cause: System is in Interim Data Recovery Mode and a failed or 
replacement drive has not yet been rebuilt. This message is displayed if the F2 
key was pressed during a previous boot or if the F1 key was pressed during a 
previous boot and the system rebooted before the rebuild of the drive completed. 

Action:  

Perform one of the suggested actions: 

− 

Press the F1 key to retry Automatic Data Recovery to the drive. Data 
will be automatically restored to drive X when a failed drive has been 
replaced, or to the original drive if it is working again without errors. 

Press the F2 key to continue without recovery of data to the drive. The 
failed drive will not be rebuilt and the system will continue to operate in 
a failed state of Interim Data Recovery Mode. 

If drive recovery is not successful, run ADU ("Array Diagnostic Utility" on 
page 

126

) for more information. 

− 

If the replacement drive failed, replace with another drive. 

− 

If the rebuild was aborted due to a read error from another physical drive 
in the array, back up all readable data on the array, run ADU, and then 
restore the data. 

 

1787-Drive Array Operating in Interim Recovery Mode... 

...Physical drive replacement needed: Drive X 

 

Summary of Contents for ML370 - ProLiant - G3






























































































































































































































































































































Reviews:

No comments

Related manuals for ML370 - ProLiant - G3

IBM H Series Installation And Service Manual preview
H Series
Brand: IBM Pages: 438
Gateway 7250R Rack Mounting Instructions preview
7250R
Brand: Gateway Pages: 26
Paradyne Hotwire 7995 Installation Instructions Manual preview
Hotwire 7995
Brand: Paradyne Pages: 32
Paradyne FrameSaver 9783 Installation Instructions Manual preview
FrameSaver 9783
Brand: Paradyne Pages: 28
NETGEAR RP334 Specifications preview
RP334
Brand: NETGEAR Pages: 2
TYAN FT83-B7119 Service Engineer'S Manual preview
FT83-B7119
Brand: TYAN Pages: 221
DataLocker IronKey EMS H350 Enterprise User Manual preview
IronKey EMS H350 Enterprise
Brand: DataLocker Pages: 23
SanDisk 175972 User Manual preview
175972
Brand: SanDisk Pages: 2
Korenix JetNet 3508-LVDC User Manual preview
JetNet 3508-LVDC
Brand: Korenix Pages: 16
Sun Microsystems Sun Fire V20z Replacing preview
Sun Fire V20z
Brand: Sun Microsystems Pages: 4
Planet IGS-5225-20T4C2X Quick Installation Manual preview
IGS-5225-20T4C2X
Brand: Planet Pages: 16
Federal Signal Corporation AR2000-M Installation And Maintenance Manual preview
AR2000-M
Brand: Federal Signal Corporation Pages: 49
IntesisBox Modbus Server-Cerberus ISO1745 Installation Manual preview
Modbus Server-Cerberus ISO1745
Brand: IntesisBox Pages: 5
7-BIT Wicher CD32 User Manual preview
Wicher CD32
Brand: 7-BIT Pages: 4
NetComm Dynalink MyZone 3G24W Remote Administration Setup preview
Dynalink MyZone 3G24W
Brand: NetComm Pages: 5
Compaq 175195-B21 Reference Manual preview
175195-B21
Brand: Compaq Pages: 139
Digital Equipment Prioris Series Manual preview
Prioris Series
Brand: Digital Equipment Pages: 15
MICRADIGITAL F5D7630uk4A-E Speci?Cations preview
F5D7630uk4A-E
Brand: MICRADIGITAL Pages: 2

Brands by name

Popular brands

Load more brands